请稍候… 
我们正在处理您的订单,请稍候
请不要按返回按钮… 
Design 911 Design 911 supply Porsche parts, Porsche spares and Porsche accessories, to both retail and to the trade. Our Porsche product and accessory range includes brakes, exhausts, tyres, wheels and Porsche panels and interiors. https://www.design91.uk/images/schemaLogo.png https://www.design91.uk/images/schemaLogo.png +443456003478 https://www.design91.uk Facebook Instagram

所有消音器/消声器

按品牌过滤
显示从1到2(共2个产品)
99722097345S
Product Information
Product Information
GT Sport 排气管。抛光不锈钢。
这是由不锈钢制成的标准更换系统。

danskmotorsport

適用於:
保时捷 997 GT2 3.6L 07/2004-12/2012

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。

99722097345S
97345S
1620602700
97.345S
99711102680

您正在查看的产品与这些编号存在交叉引用关系
TSPOGT2C07.000.A
Product Information
Product Information
Sports exhaust rear silencer and catalytic converters.
Rear silencer including reduced cell catalytic converter

tubi

Fits:
Porsche 997 GT2 and GT2 RS 2007-2012

The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

ECU REMAPPING - ENGINE LIGHT
Replacement or removal of components such as catalytic converters, GPFs and electric actuators may cause the engine warning light to come on. In this case, the installer must reprogram the software to eliminate the light

REDUCED CELL CATALYTIC CONVERTER - 200 CELLS
Race catalytic converters have fewer cells than standard factory systems. This reduces exhaust back pressure while still maintaining the operation of the catalytic converter, and improves performance and sound

SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand

END TIPS DESIGN - OE
The muffler must be used in conjunction with the original exhaust end tips

SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves

END TIPS NUMBER AND POSITION - 1 + 1 AT THE SIDES
The tailpipes are located low down at the sides of the car. There is one tailpipe at each side

MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

MAIN PIPE DIMENSION - 65mm
This is the diameter of the main pipe of the exhaust system

EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible

HEAT SHIELDING - INSULATED
Tubi Style ensures maximum protection for components in critical and dangerous positions by using insulation made with the same technology employed by car manufacturers
显示从1到2(共2个产品)
也可在这些页面找到
关于所有消音器/消声器

标准排气系统——专为性能、声音和寿命而设计

标准排气系统对于您的保时捷的性能、效率和声音至关重要。它可以控制发动机的废气流量,减少排放,控制噪音水平,并确保平衡背压,从而实现最佳动力输出。

Design911 提供采用高级不锈钢和耐腐蚀材料打造的标准排气系统。这些系统的设计符合甚至超越制造商的性能标准,完美融合了耐用性、精致度和性能,是日常驾驶和车辆修复的理想之选。

每个排气系统都经过精心设计,以确保精确的配合、出色的气流以及保留汽车原始特征的正宗保时捷排气音。

标准排气系统起什么作用?

标准排气系统发挥着多种重要作用,可确保您的保时捷高效、清洁、安全地运行。

核心功能:

  • 将废气安全地排出发动机。
  • 通过催化转化器和消音器减少排放
  • 控制背压以实现平衡的性能和燃油效率。
  • 最大限度地降低发动机噪音,同时保留保时捷的标志性音调。
  • 有助于温度调节和废气清除。

保养良好的排气系统可确保性能平稳、降低油耗并符合排放法规。

排气系统为何会失效?

排气系统不断暴露在高温、潮湿和腐蚀性气体中——随着时间的推移,所有这些都会造成损害。

常见的失败原因包括:

  • 道路盐、冷凝水和湿气造成的腐蚀和生锈
  • 由于振动和热循环导致焊缝或管道破裂
  • 内部挡板损坏导致发出嘎嘎声或失去消音效果。
  • 接头堵塞或泄漏会导致性能下降和噪音增加。
  • 烧坏的催化转换器或消声器会降低效率。

排气故障的迹象包括巨大的噪音、嘎嘎声、排气异味或发动机性能下降——所有这些都清楚地表明需要更换。

为什么要更换标准排气部件?

更换磨损或损坏的排气系统可恢复性能、舒适度和效率,同时保持保时捷独特的排气音调。

主要优点:

  • 恢复适当的排气流量和背压。
  • 提高燃油效率和功率输出。
  • 减少噪音和振动。
  • 确保符合排放标准并做好 MOT 准备。
  • 采用耐腐蚀不锈钢制成,经久耐用。
  • 直接兼容经典和现代保时捷车型。

升级到高质量标准排气装置可保留汽车原有的性能特征,同时确保持久的可靠性。

亮点:

  • 专为保时捷汽车设计的精密排气系统。
  • 优化气流以提高功率、扭矩和效率。
  • 耐用的不锈钢结构,具有耐腐蚀性。
  • 设计旨在实现真实的音调和完美的贴合。
  • 适用于经典修复和现代维护。
  • 可靠、安静且性能均衡的解决方案。

您可能也喜欢
流行车型