后侧车顶支架

Rear monoball shock mount - Set of 2




Fits:
Porsche 996 C2 / C4

Ultimate replacement for factory rubber bush mount. Compatible with OE and aftermarket struts.
Mounting holes allow for more than 1 deg of extra negative camber.

CNC machined 6061 black anodized aluminum construction with stainless steel hardware.

Reduces rear wheel camber changes during hard cornering to maintain optimum tire contact for improved traction.

Please note: As an option, you can add rubber boot protectors (at the basket stage) to seal the bearing from any road grime and debris. 
Shown on the picture in the gallery but not included in the price of the top mounts. Sold as each. 2 required.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

360250996R

您正在查看的产品与这些编号存在交叉引用关系

Rear shock mount kit.



Fits:
Porsche 996 1999-04

These shock mounts use high strength hardened steel spherical bearings and are direct replacements for the factory mounts. The Teflon lined spherical bearings used in our kit are maintenance-free and require no supplemental lubrication. Included seals prevent contamination from water or grime, thus extending bearing life.

Porsche used spherical bearings on the 997 GT3 and Cup Cars. We went one step further and added larger bearings and weather-seals to ensure longevity.

Fully Weather Sealed

We've designed in weather seals to keep dirt out and extend product life. This is the only shock mount suitable for street or extended track use. Dirt and water contaminate ordinary products and accelerate wear.

Improved Shock / Coilover Performance

The spherical bearings pivot freely and eliminate the deflection that is inherent with the factory rubber bushings. This is important because:

The factory rubber acts as a spring in series with the shock. This rubber spring-action is completely un-damped and reduces the shocks ability to control the tire contact patch. The spherical bearing allows the damper to do its job and control the contact patch.

These will work with stock springs and coilovers.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2152209

您正在查看的产品与这些编号存在交叉引用关系

Rennline Sealed REAR Top Mounts.
SET OF 2

Fits
Porsche 996 C2 3.4L / 3.6L (2 Wheel Drive)
Porsche 997 C2 3.6L / 3.8L (2 Wheel Drive)

Keep optimal rear suspension geometry at the track and during spirited street driving with Rennline Sealed Rear Strut Mounts. Factory bushings are designed to be compliant in an attempt to make the car more marketable, but if you are here you already know they could have created a more performance oriented design. Our strut mounts feature Teflon-lined spherical bearings mounted in precision machined housings to ensure a perfect fit and unbeatable quality. Unlike almost every other unit on the market, Rennline mounts include a dust boot to completely seal the bearing from stones and road grime and make our mounts a cut above the rest.

Will not work with factory suspension setup. For aftermarket coilovers only. Designed for use with conical style spring hats. If you have the cup style, see our conical style below which you will need.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

S26

您正在查看的产品与这些编号存在交叉引用关系

减震器顶部安装单球轴承。

每根车轴需要 1 套套件。

#追踪大象#

合身
保时捷 986 Boxster - 前后视图
保时捷 987 Boxster - 前后视图
保时捷 987 Cayman - 前后视图
保时捷 996 - 仅前部
保时捷 997 - 仅前部

适用于 996/997/Boxster/Cayman 的轴承座可轻松安装，替换原有的橡胶衬套。对于那些不需要更大外倾角但仍希望获得球形轴承单球轴承操控精准度的车辆而言，它是我们快速更换外倾角调整板的绝佳替代方案。球形轴承可提升车辆性能。球形轴承可自由旋转，同时消除原厂橡胶衬套固有的形变。

消除偏袒行为之所以重要，原因有二：

原厂橡胶衬套起到串联弹簧的作用，与减震器串联。这种橡胶弹簧作用完全没有阻尼，会降低减震器控制轮胎接地面积的能力。球形轴承则能使减震器发挥其应有的作用，控制轮胎接地面积。
原厂橡胶轮胎在转弯时会发生侧向变形，导致外倾角在最需要的时候丢失。我们的球形轴承可以消除这种变形，从而保持稳定且可预测的外倾角。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2011002

您正在查看的产品与这些编号存在交叉引用关系