制动盘盖板
按品牌过滤
99335280102/1KIT
Product Information
This rear brake disc backing plate (splash shield) is a precision-engineered replacement for Porsche 911 (993) models from 1995–1998, suitable for either the left or right rear axle. Built to exact original-equipment specifications, it replicates the factory design to protect the brake disc and rotor assembly from water, dust, and debris, maintaining optimal braking performance and prolonging the lifespan of surrounding components.
SET OF 2

Porsche 993 1995 - 1998 (all models)
Diagram Ref No 3
• Part Number: 993 352 801 02 (also referenced as 993-352-801-02)
• Position: Rear axle, left or right side (both sides using same part number)
• Function: Brake disc backing plate / splash shield – mounted behind rotor to protect from debris, contain brake dust, and provide clean mounting surface for rotor assembly.
• Replacement Fitment Note: Should match original mounting points, material thickness, and rotor clearance — ensures correct rotor/calliper relationship and proper wheel clearance.
Over time, the original backing plate or splash shield can become corroded, bent, or damaged, leading to rotor contact, reduced braking performance, or accelerated wear — especially in wet or salty environments. Replacement restores proper protection and maintains brake system seals to factory standards.
Replace this part when:
• It shows visible damage, bending, or breakage.
• Corrosion compromises the plate’s structure or mounting points.
• You’re performing a brake overhaul or replacing rotors/calipers.
• During restoration or maintenance to preserve collector value.
Installing a direct-fit OE replacement ensures the brake assembly stays in optimal condition and functions as intended.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99335280102
您正在查看的产品与这些编号存在交叉引用关系
Product Information
Brake disc cover plate REAR. This rear brake disc backing plate (splash shield) is a precision-engineered replacement for Porsche 911 (993) models from 1995–1998, suitable for either the left or right rear axle. Built to exact original-equipment specifications, it replicates the factory design to protect the brake disc and rotor assembly from water, dust, and debris, maintaining optimal braking performance and prolonging the lifespan of surrounding components.
SET OF 2

Porsche 993 1995 - 1998 (all models)
Diagram Ref No 3
• Part Number: 993 352 801 02 (also referenced as 993-352-801-02)
• Position: Rear axle, left or right side (both sides using same part number)
• Function: Brake disc backing plate / splash shield – mounted behind rotor to protect from debris, contain brake dust, and provide clean mounting surface for rotor assembly.
• Replacement Fitment Note: Should match original mounting points, material thickness, and rotor clearance — ensures correct rotor/calliper relationship and proper wheel clearance.
Over time, the original backing plate or splash shield can become corroded, bent, or damaged, leading to rotor contact, reduced braking performance, or accelerated wear — especially in wet or salty environments. Replacement restores proper protection and maintains brake system seals to factory standards.
Replace this part when:
• It shows visible damage, bending, or breakage.
• Corrosion compromises the plate’s structure or mounting points.
• You’re performing a brake overhaul or replacing rotors/calipers.
• During restoration or maintenance to preserve collector value.
Installing a direct-fit OE replacement ensures the brake assembly stays in optimal condition and functions as intended.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99335280102
99335280102
您正在查看的产品与这些编号存在交叉引用关系
关于此套件
该套件包括以下商品:
2 x 后制动盘盖板。保时捷 993 1995 - 1998 (99335280102/1
产品车辆组
产品车辆组
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
价格: €105.30 含 VAT
有现货 - 24 小时发货

90007545601
Product Information
#保时捷#
#法语#
保时捷 964 1994-98
图表参考编号 4
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90007545601
您正在查看的产品与这些编号存在交叉引用关系
Product Information
制动盘盖板螺栓。M 6 x 12 Z1。#保时捷#
#法语#
保时捷 964 1994-98
图表参考编号 4
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90007545601
90007545609
90007545601
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
产品车辆组
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
价格: €3.42 含 VAT
有现货 - 3-5 天发货

96435180
Product Information

保时捷964(965)Turbo
保时捷 964 Turbo 外观 2
保时捷 993 1994-98(非 RS)
图表参考编号 3
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
96435180
您正在查看的产品与这些编号存在交叉引用关系
Product Information
制动盘盖板。前部。
保时捷964(965)Turbo
保时捷 964 Turbo 外观 2
保时捷 993 1994-98(非 RS)
图表参考编号 3
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
96435180
96435180304
96435180404
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
产品车辆组
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
选择以下
价格低至: €180.41 含 VAT

99335280101
Product Information
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99335280101
您正在查看的产品与这些编号存在交叉引用关系
Product Information
制动盘盖板。后部。
#保时捷#
1994 年保时捷 993(所有型号)
单击“放大”可查看大部件图。
图表参考编号 3
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99335280101
99335280101
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
产品车辆组
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
价格: €93.35 含 VAT
可订购 - 14 到 28 天
99335280101/1
Product Information
这款后制动盘背板(防溅板)专为1994年生产的保时捷993车型设计,适用于左后轴或右后轴。该部件按照精确的原厂设备 (OE) 规格设计,可复制原厂部件的功能——保护制动盘和转子组件免受水、灰尘和道路碎屑的侵蚀,从而确保稳定的制动性能并延长部件寿命。
单件出售,适合左侧或右侧。

1994 年保时捷 993(所有型号)
图表参考编号 3
•位置:后轴,左侧或右侧(两侧使用相同的零件编号)
•功能:制动盘背板/防溅罩 - 安装在转子后面,以防止碎屑进入、容纳制动粉尘,并为转子组件提供清洁的安装表面。
•更换配件注意事项:应与原始安装点、材料厚度和转子间隙相匹配 - 确保正确的转子/卡钳关系和适当的车轮间隙。
随着时间的推移,原装背板或防溅板可能会腐蚀、弯曲或损坏,导致转子接触不良、制动性能下降或加速磨损,尤其是在潮湿或含盐环境中。更换背板或防溅板可以恢复其应有的保护性能,并使制动系统密封件保持出厂标准。
在以下情况下更换此部件:
•有明显的损坏、弯曲或破损。
•腐蚀会损害板的结构或安装点。
•您正在进行刹车大修或更换转子/卡钳。
•在修复或维护期间保持收藏价值。
安装直接安装的 OE 替换件可确保制动器组件保持最佳状态并按预期运行。
图表参考编号 3
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99335280101
您正在查看的产品与这些编号存在交叉引用关系
Product Information
后部制动盘盖板。这款后制动盘背板(防溅板)专为1994年生产的保时捷993车型设计,适用于左后轴或右后轴。该部件按照精确的原厂设备 (OE) 规格设计,可复制原厂部件的功能——保护制动盘和转子组件免受水、灰尘和道路碎屑的侵蚀,从而确保稳定的制动性能并延长部件寿命。
单件出售,适合左侧或右侧。

1994 年保时捷 993(所有型号)
图表参考编号 3
•位置:后轴,左侧或右侧(两侧使用相同的零件编号)
•功能:制动盘背板/防溅罩 - 安装在转子后面,以防止碎屑进入、容纳制动粉尘,并为转子组件提供清洁的安装表面。
•更换配件注意事项:应与原始安装点、材料厚度和转子间隙相匹配 - 确保正确的转子/卡钳关系和适当的车轮间隙。
随着时间的推移,原装背板或防溅板可能会腐蚀、弯曲或损坏,导致转子接触不良、制动性能下降或加速磨损,尤其是在潮湿或含盐环境中。更换背板或防溅板可以恢复其应有的保护性能,并使制动系统密封件保持出厂标准。
在以下情况下更换此部件:
•有明显的损坏、弯曲或破损。
•腐蚀会损害板的结构或安装点。
•您正在进行刹车大修或更换转子/卡钳。
•在修复或维护期间保持收藏价值。
安装直接安装的 OE 替换件可确保制动器组件保持最佳状态并按预期运行。
图表参考编号 3
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99335280101
99335280101
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
产品车辆组
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
价格: €37.44 含 VAT
到期 30+ 天
99335280102/1
Product Information
这款后制动盘背板(防溅板)专为1995年至1998年生产的保时捷911 (993)车型设计,可安装在左后轴或右后轴位置。该部件按照精确的原厂设备 (OE) 规格设计,可复制原厂部件的功能——保护制动盘和转子组件免受水、灰尘和道路碎屑的侵蚀,从而确保稳定的制动性能并延长部件寿命。
单件出售,适合左侧或右侧。

保时捷 993 1995 - 1998(所有车型)
图表参考编号 3
•零件编号:993 352 801 02(也称为 993-352-801-02)
•位置:后轴,左侧或右侧(两侧使用相同的零件编号)
•功能:制动盘背板/防溅罩 - 安装在转子后面,以防止碎屑进入、容纳制动粉尘,并为转子组件提供清洁的安装表面。
•更换配件注意事项:应与原始安装点、材料厚度和转子间隙相匹配 - 确保正确的转子/卡钳关系和适当的车轮间隙。
随着时间的推移,原装背板或防溅板可能会腐蚀、弯曲或损坏,导致转子接触不良、制动性能下降或加速磨损,尤其是在潮湿或含盐环境中。更换背板或防溅板可以恢复其应有的保护性能,并使制动系统密封件保持出厂标准。
在以下情况下请更换此部件:
•有明显的损坏、弯曲或破损。
•腐蚀会损害板的结构或安装点。
•您正在进行刹车大修或更换转子/卡钳。
•在修复或维护期间保持收藏价值。
安装直接安装的 OE 替换件可确保制动器组件保持最佳状态并按预期运行。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99335280102
您正在查看的产品与这些编号存在交叉引用关系
Product Information
后部制动盘盖板。这款后制动盘背板(防溅板)专为1995年至1998年生产的保时捷911 (993)车型设计,可安装在左后轴或右后轴位置。该部件按照精确的原厂设备 (OE) 规格设计,可复制原厂部件的功能——保护制动盘和转子组件免受水、灰尘和道路碎屑的侵蚀,从而确保稳定的制动性能并延长部件寿命。
单件出售,适合左侧或右侧。

保时捷 993 1995 - 1998(所有车型)
图表参考编号 3
•零件编号:993 352 801 02(也称为 993-352-801-02)
•位置:后轴,左侧或右侧(两侧使用相同的零件编号)
•功能:制动盘背板/防溅罩 - 安装在转子后面,以防止碎屑进入、容纳制动粉尘,并为转子组件提供清洁的安装表面。
•更换配件注意事项:应与原始安装点、材料厚度和转子间隙相匹配 - 确保正确的转子/卡钳关系和适当的车轮间隙。
随着时间的推移,原装背板或防溅板可能会腐蚀、弯曲或损坏,导致转子接触不良、制动性能下降或加速磨损,尤其是在潮湿或含盐环境中。更换背板或防溅板可以恢复其应有的保护性能,并使制动系统密封件保持出厂标准。
在以下情况下请更换此部件:
•有明显的损坏、弯曲或破损。
•腐蚀会损害板的结构或安装点。
•您正在进行刹车大修或更换转子/卡钳。
•在修复或维护期间保持收藏价值。
安装直接安装的 OE 替换件可确保制动器组件保持最佳状态并按预期运行。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99335280102
99335280102
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
产品车辆组
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
价格: €52.65 含 VAT
有现货 - 24 小时发货

99335280102
Product Information


Porsche 993 1995>> (all models)
Click 'Zoom in' for large parts diagram.
Diagram Ref No 3
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99335280102
您正在查看的产品与这些编号存在交叉引用关系
Product Information
Brake disc cover plate REAR.

Porsche 993 1995>> (all models)
Click 'Zoom in' for large parts diagram.
Diagram Ref No 3
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99335280102
99335280102
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
产品车辆组
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
价格: €93.34 含 VAT
可订购 - 14 到 28 天
显示从1到7(共7个产品)
也可在这些页面找到
您可能也喜欢
流行车型