后副车架

Eccentric adjuster locking kit.
6pcs in kit - 1 kit required per car



Fits
Porsche 993 - All

Prevent Alignment Settings From Slipping

Losing on the track is bad enough, but losing the alignment on the track is even worse. Prevent your eccentric adjuster bolts from slipping under heavy cornering loads with our Eccentric Adjuster Locking Kit.

Complete kit includes four lockout plates. Two plates are used to lock the rear toe adjusters and two plates to lock the camber settings.

Retain convenience and functionality of the eccentric adjuster. The original functionality of the adjuster is completely preserved. The plate can be set in any position.

Retain full range of the adjuster. These lockout plates do not limit adjustment range in any way, maximum toe and negative camber can be achieved with these plates in place.

Works with OEM fixed length arms and our adjustable length control arms as well.The unique design features a slotted hole that counters the slot provided for the adjuster. The plate can be moved up and down to reach any camber or toe setting desirable.

The Locking plates function by increasing the friction that holds the factory eccentric adjusters in place. These plates are guaranteed to prevent any adjuster slip even under aggressive driving conditions.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2180019

您正在查看的产品与这些编号存在交叉引用关系

HD 后副车架衬套。赛车版
全套（4 件）。一辆车需要 2 套。



适合:
保时捷 993 1995-98 所有车型

使用高密度副车架衬套，提升后桥稳定性，延长定位系统寿命。原厂部件会导致后桥更加“紧张”和不稳定，尤其是在悬挂负载较高的情况下，尤其是在它们开始失效时。这些衬套不仅负责将整个后副车架固定在车架上，还负责将其相对于车身和其他悬挂部件定位。这意味着，即使原厂衬套没有完全损坏，软衬套也常常会导致整个后悬挂发生位移并重新调整，从而影响整辆车。我们的高密度衬套套件由高强度橡胶制成，其刚度比原厂部件高出 25%，包含铝制内芯和外框，是您 993 的即插即用解决方案。拥有这套完整的后副车架套件，让您拥有更稳固的后桥，告别在定位车间的劳顿。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99333105100

您正在查看的产品与这些编号存在交叉引用关系

HD 后副车架衬套。街道版
全套（4 件）。一辆车需要 2 套。



适合:
保时捷 993 1995-98 所有车型

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99333105100

您正在查看的产品与这些编号存在交叉引用关系

后副车架衬套（全套）。
使用这款后副车架衬套套件，恢复您的保时捷 993 的精准性和稳定性。这些衬套将后副车架固定到底盘上，隔离路面振动，同时保持精确的悬架调校和几何形状。
以 4 件为一套出售。
每辆车需要 x2。

适合:

• 保时捷 993（911）C2 1994-97
• 保时捷 993（911）C4 1994-97
• 保时捷993（911）RS 1994-97
• 保时捷 993（911）C2S 1994-97
• 保时捷 993（911）C4S 1994-97
• 保时捷 993 (911) 涡轮 1994-96
• 保时捷993（911）GT2 1994-97
• 保时捷 993 (911) TURBO S 1994-97

适合图表参考编号 2

本产品的作用：

• 隔离振动和噪音 -它们在刚性副车架和较软的车身外壳之间提供缓冲界面，有助于吸收道路振动、冲击和噪音。
  
• 精确定位副车架 -衬套限制副车架在某些方向上的移动，保持一致性并防止在负载（加速、制动、转弯）下发生不必要的移位。
  
• 允许受控的灵活性 -虽然它们会限制大运动，但它们允许一些小的运动/柔顺性，以避免对底盘或悬架部件造成过大的压力，特别是当汽车在颠簸或扭矩负载下移动时。
  
• 支持后端稳定性和操控性 -由于副车架保持后悬架几何形状（臂、连杆、差速器等），磨损或柔软的衬套会导致负载下的对准发生变化，从而降低精度和稳定性。
  
  

衬套磨损或失效的症状和迹象：

• 车辆在颠簸时，尤其是在加速或减速时，后部会发出咔哒声、撞击声或砰砰声。
  
• 转弯或突然负载变化时，操控/后端运动松散或不精确。
  
• 后部稳定性问题，例如牵引不规则或用力推时感觉汽车“游走”或“失控”。
  
• 定位保持性差——行驶后或负载下，定位规格（外倾角、前束）可能会发生变化，需要频繁重新调整。
  
• 通过底盘（尤其是后部）的振动或不平顺性更多地通过车身传递。
  
• 可见的损坏，如橡胶出现裂缝、裂口或变形、汽车升起时过度弯曲/晃动，或衬套内外部分分离。
  
  

为什么更换很重要：

• 恢复后端精度——新衬套确保副车架牢固而准确地固定，改善操控性和底盘响应。
  
• 更好的对准稳定性——新的衬套保持悬架设置稳定，减少了频繁对准检查或更换的需要。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99333105100

您正在查看的产品与这些编号存在交叉引用关系

Powerflex 后副车架安装衬套。
以 4 件为一包出售（两个副车架）



该部件适用于子框架部件编号：
99333105100、99333105180、99333105200 和 99333105280。

適用於:
保时捷 993 1993-95

Powerflex。用聚氨酯悬架衬套替换您的汽车橡胶悬架衬套将为您带来以下好处：

- 更好的抓地力
- 恒定转向几何
- 延长轮胎寿命
- 转向更灵敏
- 悬架部件的使用寿命更长

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFR57-920

您正在查看的产品与这些编号存在交叉引用关系

Powerflex Black Series Rear Subframe Mounting  Bush.
Sold as a pack of 4 (both subframes)



This part fits into sub frame part numbers:
99333105100, 99333105180, 99333105200 & 99333105280.

Fits:
Porsche 993 1993-95

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFR57-920BLK

您正在查看的产品与这些编号存在交叉引用关系

Powerflex Heritage Collection Rear Subframe Mounting Bush.
Sold as a pack of 4 (both subframes)



This part fits into sub frame part numbers:
99333105100, 99333105180, 99333105200 & 99333105280.

Fits:
Porsche 993 1993-95


Powerflex Heritage Collection. For Modern Day Classics.

A range of bushes engineered for the road to compliment your classic car.

POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFR57-920H

您正在查看的产品与这些编号存在交叉引用关系

Rear suspension side section bushing kit.
4 pcs in kit - 2 kits required per car



Fits
Porsche 993 - All 1994 - 1998

Replaces the rubber bushings on the rear 993 side panels.

Stock hardness – Restores performance and ride quality to original.

Sport-hardness – Firmer rubber more precisely locates suspension members under load, without the noise and vibration associated with solid metal alternatives.

Each side panel has 4 rubber bushings, for a total of 8 bushings per car.
Each kit includes 4 bushings, order 2 kits per car

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

229001

您正在查看的产品与这些编号存在交叉引用关系

Solid Rear Subframe Bushing Kit.


Fits:
Porsche 993

Factory rubber suspension mounts have a lot of flexibility and cannot withstand the extreme loads applied to them during performance driving conditions. When these mounts flex, all of the suspension geometry changes making the car unstable and unpredictable. A very popular suspension upgrade is to replace these bushings with solid mounts like the ones found on the factory race cars. These kits are machined out of billet aluminium and come with the required hardware to install.


Note: Pictures may not show actual product.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

SB5876

您正在查看的产品与这些编号存在交叉引用关系

Solid subframe bushing set. Precision Handling - REAR
1 kit required per car.



Fits:
Porsche 993 1995-98

Stock rubber bushings compress and deform under heavy cornering, braking, and acceleration loads. The compliant rubber bushings allow the entire rear subframe shift about relative to the chassis. Rear camber and toe settings wander along with the subframe making the car less predictable, less stable in turns.

Our solid bushings replace the compliant rubber and do not deform under cornering loads, keeping the subframe in position and alignment true even under heavy cornering loads. The car becomes more predictable and easier to drive fast.

Corrects Geometry
Raises the subframe by 10mm to improve geometry and camber curve on lowered cars.

Build Quality
Each bushing consists of two pieces… identical upper and lower pucks.

Each piece is precision machined from high-strength aluminium with an anodized finish for protection.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2290037

您正在查看的产品与这些编号存在交叉引用关系