后扰流板/翼型件

Rear wing riser kit.



Fits:
Porsche 991 GT3

The Verus Engineering OEM Wing Riser Kit not only improves performance of the factory rear wing, but also improves visibility out the rear window of your 991 GT3. This means an increase in rear downforce and a rear view mirror that functions better then before. The units are produced in house on our 5-axis CNC mills out of 6061-T6 aluminum.

Utilizing state-of-the-art analysis software during the R&D process, we were able to ensure that the OEM wing improved performance. Using in house scan data during the design process, we were able to design the wing risers with aesthetics that follow the factory Porsche body lines and bolts on like an OEM piece.

Add performance, improved aesthetics, and function to your 991.1 or 991.2 GT3 with these simple to bolt on units.

Kit Includes

• Left Wing Riser
• Right Wing Riser
• Hardware Kit, Includes All Necessary Hardware for Install

Features
Increase Downforce Generated by OEM Wing
Improved Overall Aerodynamic Efficiency
Better High-Speed Stability
Reduce Lap Times
Simple Bolt-On Installation

Specifications
CFD Designed and Tested
6061-T6 Machined Construction
CNC Cut in House in the USA
Stainless Hardware is Used Throughout 

后翼扰流板延伸。
拥有 TÜV 零件认证（§19.3），在瑞士也得到认可。

#莫沙默#

适合：
保时捷 991 Turbo | Turbo S
不适用于配备原装 Aerokit 的车型。

991 Turbo 后扰流板延伸件可确保最佳的空气动力学性能，同时也是一个漂亮的 OEM+ 设计元素，让您的保时捷拥有独特的外观。

我们的 991 Turbo 后扰流板延伸件可确保最大下压力。原有的高度调节和降低当然保持不变。保时捷主动空气动力学后扰流板的功能保持不变。

MOSHAMMER® 专利安装系统，即插即用，无需钻孔，无需拧螺丝！

这款后翼扰流板延伸件已上底漆并准备好上漆。 包含安装材料。

请注意，此商品不是库存产品。这是特殊订单部件，一旦向我们订购，除非证明不适合用途或有缺陷，否则不得取消或退货。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

P991.20.3020

您正在查看的产品与这些编号存在交叉引用关系

• 后部增强塑料（FRP）
• 湿碳纤维
• 干碳纤维

Rennline 鸭尾式后扰流板。

#雷恩线#

适合

保时捷 991.1 - 2012 年至 2016 年

Rennline 的全新鸭尾扰流板是为您的 991 赋予 OEM+ 外观的绝佳方式，并在经典保时捷设计的基础上融入现代风格。由高品质 ABS 塑料或手工铺设碳纤维制成，采用最先进的制造技术进行工厂安装和表面处理。

产品描述

• 采用最新技术的高品质建筑
• 碳纤维版本是手工铺设的，具有高光泽的紫外线防护涂层
• 使用工厂行李箱盖的 3D 扫描进行 CAD 设计
• 以标志性的保时捷鸭尾设计为蓝本
• ABS 版本易于涂漆，可与车身颜色匹配
• 使用预装工业级3M VHB胶进行安装
• OEM 装配和表面处理
• 适合所有 991 车型

有碳纤维或 ABS 塑料可供选择

更换后百叶窗，碳纤维。

适合:
保时捷991.1 Carrera

Rennline 全新碳纤维百叶窗能让您的 991.1 Carrera 拥有 OEM+ 外观和现代升级，带来绝佳体验。采用优质碳纤维材质，并运用最新技术，在保持原厂装配和精加工的同时，更添时尚气息。安装过程轻而易举，只需取下 OEM 盖板，即可安装全新碳纤维部件！

采用最新技术的高品质碳纤维结构
原厂行李箱盖的三件式碳纤维替换件
OEM 装配和完成
适合所有 991.1 Carrera
采用 OEM 面板尺寸设计
OEM 连接点
使用基本的手动工具几分钟内即可安装

Side cover rear spoiler. 

Fits:
Porsche 991.1 Carrera / Carrera 4 - 2012 to 2016

Click 'Zoom in' for large parts diagram.
Diagram ref no 5

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99150466

您正在查看的产品与这些编号存在交叉引用关系

SportDesign Package.



The SportDesign package includes not only the SportDesign front apron with distinctive spoiler lip, but also a rear spoiler that emphasises the ultra-sporty look of the new 911 model range and helps to reduce lift.

If your vehicle is already equipped with the SportDesign package, there is still scope for further enhancement with the Aerokit Cup available from Porsche Tequipment.

Note: reduces ground clearance. To preserve aerodynamic stability, front and rear spoilers may not be fitted separately.

Fits:
Porsche 991 Carrera / Carrera S COUPE 2012>>
Porsche 991 Carrera / Carrera S CABRIO 2012>>

OPTIONS:
1. 99104480284 - For cars without PDC & Bi-Xenon (Headlamp Cleaning System)
2. 99104480285 - For cars with Bi-Xenon (Headlamp Cleaning System) 
3. 99104480286 - For cars with PDC
4. 99104480287 - For cars with PDC & Bi-Xenon (Headlamp Cleaning System)

Please Select below

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99104480

您正在查看的产品与这些编号存在交叉引用关系

Swan neck rear spoiler kit, carbon fibre. 

Fits:
Porsche 991.1 GT3
Porsche 991.2 GT3 RS
Porsche 991.2 GT2 RS

Dramatically improve rear-end grip at speed with our 300mm chord, swan neck rear wing. The wing and full aero kit were designed in CFD to greatly improve the vehicle's performance on and off the track.

The wing is a large driving force behind the improvement in downforce, coupled with the front splitter it transforms the GT3RS into a track weapon.

The rear wing was designed, iterated, and tested in CFD and a wind tunnel. All component mounting was designed off OEM scans and requires no permanent modification to the rear hatch of the vehicle.

The uprights are CNC machined from 6061-T6 aluminum and were FEA analyzed to ensure strength was kept high while weight was minimized. 

Kit Includes

• Carbon Rear Wing, 300mm Swan Neck
• Carbon Vented Endplate (2)
• Machined 6061 Swan Neck Upright (2)
• Machined 6061 Chassis Mount Bracket (2)
• Machined Delrin Chassis Stop (2)
• Gurney Flap
• 3m VHB Double-Sided Tape, Gurney Flap
• Hardware Kit, Includes All Hardware Necessary for Install

Features

Rear Wing
2x2 Twill, 3k, Pre-Preg Carbon Fiber
Cured in an AutoClave
Carbon Inner Rib for Strength
Carbon Endplates
The Wing Itself Weighs in at Under 9 lbs

Mounting
Machined 6061-T6 Aluminum Mounts and Uprights
Military Spec (NAS) Hardware On Wing
Bolts on like OEM
Zero Permanent Modifications to the Chassis

Specifications
CFD Optimized Airfoil
Highly Efficient (Great L/D)
15 Total Adjustment Angles (-1 to 14 degrees)
Lightweight and High Strength
Capable of Generating and Handling Over 700lbs of Downforce at 120MPH
Swan Neck Design for Improved Efficiency from the Wing Element
OEM Bolt-On Install

Touring package add on lip for rear spoiler. Primed.



Fits:
Porsche 991 R/GT3/RS 11/2017 - 12/2020  Touring models 

Click 'Zoom in' for large parts diagram.
Diagram ref no 9

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99150428182G2X

您正在查看的产品与这些编号存在交叉引用关系