前扰流板/保险杠

Carbon fibre front bumper dive plane kit.

Available in Gloss or Matte Carbon Fibre



Fits
Porsche 991.1 GT3 / GT3 RS - 2012 to 2016

The Dive Planes for the Porsche 991.1 GT3/GT3RS were specifically designed to increase front-end downforce, increase the high-pressure airflow to the factory intake duct, and to keep drag increase minimal.

Depending on driver preference, no rear aero is needed to balance out these units. We have seen up to 0.7 second gains due to increased front end grip at high speed corners which allows improved corner speed. If as a driver you feel the car needs more rear stability, we would not suggest these units without adding a rear aerodynamic device.

The units were designed in CAD using scan data and optimized using CFD within ANSYS Fluent.

These units are constructed from 1.5mm thick pre-preg, autoclaved cured, 2x2 twill carbon in both a matte and gloss clear coat.

Dive planes, also referred to as canards, allow you to shift the aero balance forward, possibly aiding you and your setup in balancing out a large rear wing or diffuser.

Kit Includes
• Dive Plane x 4 (Upper x 2, Lower x 2)
• 3M VHB Tape (4 Pieces, 1 for each Dive Plane)
• Install Template

前保险杠鸭翼采用碳纤维制成
成对出售



適用於:
保时捷 991.1 GT3 2014 - 2017


相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

991.1GT3CARBFRTCAN

您正在查看的产品与这些编号存在交叉引用关系

前保险杠鸭翼采用高光泽碳纤维制成。

#沃施泰纳#

适合：

保时捷 991.1 911 GT3
保时捷 991.1 911 GT3RS
保时捷 991.1 911 R
保时捷 991.2 911 GT2RS

这些前保险杠鸭翼（俯冲机）旨在增加前端的下压力，采用预浸高压釜碳纤维制成，表面具有高光泽度。

可以使用双面胶带进行安装，以防止在工厂前保险杠上钻孔。

前保险杠进气饰件采用干碳。



適用於:
保时捷 991.2 GT3 2018-21


相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

991.2GT3CARBFRTINTAKE

您正在查看的产品与这些编号存在交叉引用关系

Front bumper lower splitter kit. Porsche 991.1 GT3 RS

Fits:
Porsche 991.1 GT3 RS

Front splitters are very effective at producing front end downforce without significantly increasing drag and this is done by creating a large pressure delta between the top and bottom surfaces. We then incrementally improved the front splitter by adding design tweaks to the underside of the splitter to improve flow with our carbon splitter diffusers. All of this adds up to a front splitter kit for the 991.1 GT3RS that creates a large amount of additional front end downforce.

The splitter is produced from a carbon thermoplastic, which is the same material used in high forms of Motorsports. The material is not brittle, so no more issues with cracking like carbon fiber and ABS. It will not grab and bend under the car like aluminum units either. It is a great splitter material.

Bracketry was designed from scan data, precision cut and bent to ensure repeatability. The carbon diffusers were developed in CFD to promote flow and improve downforce generation. The splitter was designed to balance out large rear wings, more specifically our V1x for the chassis.

Kit Includes

• Carbon Polyweave Splitter 
• Polyweave Grind Strake x 4
• Carbon Splitter Diffuser x 2
• Sheet Aluminum Diffuser Block Off x 2
• Sheet Metal Bracket Kit x 13
• Steel Cross Beam Tube 
• Clevis x 4
• Splitter Support Rod Assy x 2
• Hardware Kit, Including all Hardware Necessary for a Seamless Install

Features
Greatly Increases Front End Downforce
Produces High Downforce for Large Rear Wings
Capable of Handling 300+ Lbs
Constructed From Carbon Thermoplastic, Which Offers Strength, Low Weight, Durability, and a Great Appearance
Same Material Used in Various Forms of Racing, Including Indy Car, NASCAR, and F1
Non-Invasive / Easy Install

Specifications
Front Splitter is Manufactured From Carbon Thermoplastic, Offering Superior Strength, Weight, Durability, and Appearance to Many Other Options
Will Not Grab and Bend Surfaces Like Aluminum Units
Will Not Crack and Break Like Carbon and ABS Units
Abrasive Resistant While Stiff
CNC Cut and Bent Brackets
Stainless Hardware Throughout

前保险杠，已上底漆。



适合：
保时捷 991 GT3 RS 2014-21

单击“放大”可查看大部件图。
图表参考编号 1

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99150519196

您正在查看的产品与这些编号存在交叉引用关系

前下扰流板。黑色。



适合：
保时捷 991 GT3 RS 2014-21
适用于配备电子减震器控制装置“PASM”的车辆（选装代码：475）

单击“放大”可查看大部件图。
图表参考编号 14

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

991505525911E0

您正在查看的产品与这些编号存在交叉引用关系

碳纤维前下扰流板，。
采用碳纤维预浸料高压釜成型，固化后具有光泽透明的表面。

#斯福萨#

适合：
保时捷 991.1 GT3 RS

请注意：这是按订单生产的特殊订单商品。在某些情况下，请留出 4 - 5 周的时间进行交货。一旦您下订单，就无法取消此供应商的特殊订单商品。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

SFC991505525901E0

您正在查看的产品与这些编号存在交叉引用关系

适用于保时捷 911(991) GT3 / GT3 RS 的杯形前部进气口 / 前扰流唇。
前扰流唇，3 件，适用于2011 年 12 月至 2017 年 1 月保时捷 911(991) GT3 / GT3 RS。
适用于车型/车身变体 GT3 和 GT3 RS



请注意：此扰流板需要稳定器。购买此扰流板时，您可以将其添加到购物车中。

• 杯形光学元件
• 极端接触压力。特别适用于赛车用途
• 没有证书，因为专门用于比赛目的
• 必要时包括安装配件
• 包含组装说明
• 前扰流板唇采用创新的高品质材料 Fiberflex 制成。这种新型复合材料的优点：极高的柔韧性与出色的稳定性、抗碎裂性和不易燃性相结合。极高的制造质量和低重量甚至使其可用于专业赛车。独特的黑色表面具有良好的加工选项，可确保专业效果。Fiberflex 制成的产品具有出色的切割和粘合性能，非常适合维修和其他改装工作。
• 均匀的表面结构使喷漆无需大量准备工作（产品未上漆）
• 材料灵活

请注意：这是特殊订单商品，可能需要 8-12 周才能交付，并且一旦订购就无法取消。

Vorsteiner V-RS Aero 前裙板碳纤维。
材料：高压灭菌 1×1 预浸碳纤维
带有抗紫外线透明漆涂层。

#沃施泰纳#

适合：
仅限保时捷 991 GT3 RS

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

POV1120

您正在查看的产品与这些编号存在交叉引用关系

Vorsteiner V-RS Aero Wing 叶片和端盖。
材料：高压灭菌 1×1 预浸碳纤维
带有抗紫外线透明漆涂层。

#沃施泰纳#

适合：
仅限保时捷 991 GT3 RS

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

POV1170

您正在查看的产品与这些编号存在交叉引用关系