可切换消音器/消声器

运动型排气保时捷 911 (991.3) GT3 和 Speedster 2019



适合
保时捷 911（991.3）GT3 2019
保时捷 911 (991.3) Speedster 2019

仅供赛道使用
这些部件是为赛道使用而设计和开发的，旨在最大限度地提高汽车的性能。它们不合法，必须由该领域的专业人员安装

安装
必须与 GPF（汽油微粒过滤器）的 OE 头一起安装
按照制造商车间手册中的说明，该部件可以与原始部件完美互换

声音 - 直管
直管版本保证了发动机的直接路径，消除了可能影响声学调节的所有因素

末端设计 - 斜切
斜切排气管，带内部卷边

末端尺寸- 100mm
该值指的是排气端头的外部尺寸

排气和尾端饰面 - 抛光
镜面抛光具有高反射性，通过抛光不锈钢制成。抛光过程可增强外观和一致性，使清洁更容易。使用特殊的滚压程序。必须去除深划痕，因为任何表面缺陷在成品上都会非常明显。它提高了耐腐蚀性。抛光可消除腐蚀颗粒可能滞留的缝隙

末端尖端数量和位置 - 2 中央
末端从中心露出

材料
AISI 304 不锈钢
一种适用于腐蚀性环境的不锈钢，在这种环境中，燃烧排放物可能会对其他类型的金属造成严重的化学腐蚀

主管道尺寸 - 76
这是排气系统主管的直径（毫米）
排气阀
电的
排气系统配有电动阀。不包括电动执行器，必须使用汽车上已安装的标准执行器。仍提供对原始阀门的控制

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

TSPO991GT3RS19.001.A

您正在查看的产品与这些编号存在交叉引用关系

Sports exhaust side silencer straight pipe with valves.
Replaces rear side silencers with straight pipes



Fits:
Porsche 911 GT3 and GT3 RS (997 Gen 1 and Gen 2)
Porsche 911 GT3 and GT3 RS (991.1 and 991.2 upto 2019)

This product can be mounted on every GT3, GTR RS, GT3 RS 4.0 versions, both on 997 Gen 1, Gen 2 and on 991.1 and 991.2 up to 2019

The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

SOUND - STRAIGHT PIPE
The straight pipe version guarantees a direct path from the engine, removing all factors which may affect the acoustic tuning

SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves

MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

MAIN PIPE DIMENSION - 65mm
This is the diameter in mm of the main pipe of the exhaust system