前悬挂连接杆及衬套

前后下拉杆套装（4 件套）
这是一套完整的悬挂防倾杆连杆更换套件，包含四个与原厂规格相匹配的连杆，适用于保时捷 911 964 的前后悬挂系统，套件包括：
1 个前左下拉杆 - OE 参考编号 96434307101
1 个前右下拉杆 - OE 参考编号 96434307201
1 个后左下拉杆 - OE 参考编号 96433307371
1 个右后下拉杆 - OE 参考编号 96433307402

适用：
保时捷 964 1990 - 1994 所有车型

图示编号 18。

本产品为一套四根原厂匹配的防倾杆连杆——前后各两根——用于连接911（964）车型上的每根稳定杆（防倾杆）与其对应的悬架臂。连杆在车辆悬架动力学中起着至关重要的作用，它们在转弯时传递横向载荷，从而减少车身侧倾。

该套件中的连杆通过在防倾杆和悬挂臂之间传递力，确保防倾杆能够有效抵抗车身侧倾。这增强了稳定性、抓地力和操控精度：

•前下拉杆（96434307101 和 96434307201）：将前稳定杆连接到前悬架。
•后稳定杆连杆（96433307371 和 96433307402）：将后稳定杆连接到后悬架。

通过更换前后连杆，使用原厂配套部件，有助于恢复车辆四个车轮的平衡侧倾阻力。

功能：
•将稳定杆的力传递到悬架臂
•减少过弯时的车身侧倾
•提升操控平衡性和转向精度
•有助于保持轮胎与地面的接触和抓地力
•高速行驶时，悬架性能稳定、可预测。

防倾杆连杆承受着日常驾驶和激烈驾驶带来的持续运动、载荷和高温。随着时间的推移，其接头和衬套可能会磨损或松动，导致：
•行驶过颠簸路面时发出咔嗒声或敲击声
•转弯时车身侧倾加剧
•转向感觉松散或模糊
•轮胎磨损不均
•悬架平衡性受损。

更换前后稳定杆连杆，使用配套的原厂配套产品，可以恢复稳定杆的正确功能，有助于保持可预测的操控性，并提供更稳定、更自信的驾驶体验。

何时更换。在以下情况下需要安装此完整连杆组件：
•您听到悬挂系统发出噪音，可能是前部或后部发出的。
•操控感觉松散或不稳定
•车辆存在过度倾斜现象。
•您正在进行全面的悬架系统大修或定位。
•原装连接件出现明显的磨损、松动或损坏。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

DROPLINKKIT964

您正在查看的产品与这些编号存在交叉引用关系

Drop links, Front.
OE Match complete front anti-roll bar (stabiliser bar) drop link set for Porsche 911 964 C2 and 965 Turbo models. It includes both the left (OE ref no 96434307101) and right (OE ref no 96434307201) front drop links, engineered to match the original Porsche factory parts in fit and function.
SET OF 2 links - for left and right side.

Fits:
Porsche 964 C2 1990 - 1994
Porsche 965 Turbo 1991 - 1994

This product supersedes Porsche's old part numbers:
- 96434307100 (LEFT) / 96434307200 (RIGHT)

Diagram ref no 7

This product is a two-piece OE Match front drop link set used to connect the front stabiliser (anti-roll) bar to the front suspension components on Porsche 911 964 models.

It includes:
•   1x 96434307101 – Left front drop link
•   1x 96434307201 – Right front drop link

OE Match components are precisely engineered to replicate the original Porsche part’s dimensions, joint positioning, and load-bearing characteristics. This makes them a reliable replacement for worn or aging original drop links and restores consistent handling performance.

The front drop links attach the front anti-roll bar to the suspension’s lower control arms or uprights. When the vehicle corners, the stabiliser bar transfers force across the axle. The drop links serve as the connection points that transmit this energy, helping to resist body roll, improve balance, and maintain tyre contact during dynamic driving. Without effective drop links, the anti-roll bar cannot properly stabilise the chassis, which can lead to excessive body lean, vague steering response, and uneven tyre loading.

Function:
•  Connects stabiliser bar to suspension: Transfers lateral forces into the chassis
•  Reduces body roll: Helps keep the car flat through corners
•  Improves handling balance: Enhances steering precision and road stability
•  Absorbs movement and vibration: Provides smooth linkage motion through bushings/ball joints

Over time, front drop links can wear from exposure to road shock, heat, and damp conditions. Worn or failing drop links can cause:
•  Clunking or knocking noises over bumps
•  Loose or “floaty” cornering feel
•  Increased body lean and reduced stability
•  Uneven tyre wear
•  Less precise steering response

Replacing both drop links together restores the intended anti-roll bar performance, improves handling response, and prevents premature wear on other suspension components. OE Match links ensure both sides are renewed to the same specification for balanced performance.

When to replace. Install this drop link set when:
•  You hear suspension noise (clunks/knocks) from the front end
•  Handling feels less stable or predictable during cornering
•  You notice excessive body roll
•  The original links show visible wear or play
•  You are undertaking front suspension service or rebuild

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

96434307X01

您正在查看的产品与这些编号存在交叉引用关系