前履带控制臂

前控制臂后橡胶衬套。
价格为每件。每辆车需要 2 件。

适合:
保时捷 964 1989-94 后衬套运动硬度
保时捷 993 1995-98 后衬套运动硬度
保时捷 944 1985-95 带铝制前衬套运动硬度臂

控制臂衬套由两个半体组成，分别用于每个控制臂。套件包含一个完整衬套的两个半体。

库存硬度——恢复原有的性能和乘坐质量。

运动硬度——运动硬度橡胶比普通橡胶硬度高出约25%。它在转弯载荷下变形更小，从而更精确地保持对准。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PR05012P

您正在查看的产品与这些编号存在交叉引用关系

前控制臂后橡胶衬套。单价。每辆车需2个。
这款控制臂衬套套件可让您的保时捷重现原厂操控精准度和驾乘舒适度。这些高品质橡胶衬套在欧洲制造，符合原厂标准，可直接替换原厂前叉臂衬套。每套套件包含 2 个衬套和 2 个垫片，足够用于车辆的一侧。每辆车需要两套。这款衬套套件非常适合维护公路车或经典车型的原厂悬架性能，有助于减少不必要的间隙，改善转向手感，并消除由磨损部件引起的悬架噪音。

适合:
保时捷 964 1989-94 后衬套原厂硬度
保时捷 993 1995-98 后衬套原厂硬度
保时捷 944 1985-95 944 带铝制前臂衬套 原装硬度

控制臂衬套由两个半体组成，分别用于每个控制臂。套件包含一个完整衬套的两个半体。

库存硬度——恢复原有的性能和乘坐质量。

运动硬度——运动硬度橡胶比普通橡胶硬度高出约25%。它在转弯载荷下变形更小，从而更精确地保持对准。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PR05001P

您正在查看的产品与这些编号存在交叉引用关系

Bushing & monoball installation tool. 1 req'd per lifetime.



Fits:
Porsche 964 1989-94 front lower control arms, rear bushing
Porsche 993 1995-98 front lower control arms, rear bushing
Porsche 994 1976-95 front lower control arms, front bushing

This tool allows installation of lower control arm bushings without a shop press. It can be used for installation rubber bushings as well as our monoball cartridges.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2201702

您正在查看的产品与这些编号存在交叉引用关系

Split bushing removal tool. 1 req'd per lifetime.



Fits:
Porsche 911 / 912 / 930 1965-89
Porsche 964 / 993 1989-98
Porsche 944 / 968 / 924 1976-95 w/ aluminium control arms

Easily removes the following bushings:
• 911 / 930 / 912 trailing arm bushing
• 964 / 993 front lower control arm rear bushing
• 944 front lower control arm front bushing (aluminium arms)

It used to be a difficult task

This clever tool is a real time saver that makes easy work of removing split bushings. Doing the job with the arms still on the car for 911, 964, and 993 saves time and labor.

Split bushings are actually two separate bushings, each pressed in from opposite sides of the arm. Removing them requires driving them out from the parting line where they meet, in the center of the arm. This has traditionally been a difficult job that requires removing the arm and fumbling with a punch to try and drive out the bushings from the center.

Easy & quick
This tool makes it easy to engage the parting line and drive out the bushing. It is so easy that the job can be performed without removing the arm from the 911, 964, and 993.

Pro Mechanics and DIY'ers alike will appreciate the time saving this tool provides.

Combine with bushing installation tools part #2020904 to complete the job.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2020903

您正在查看的产品与这些编号存在交叉引用关系

Spring plate bushing tool.
1 required per lifetime.



Fits:
Porsche 911 - 1965 to 1989
Porsche 930 turbo - 1975 to 1989
Porsche 912 - 1966 to 1976
Porsche 944 - 1982 to 1991
Porsche 968 - 1995 to 1995

We've developed this tool to simplify removal of spring plate bushings. The bushings are bonded to the spring plate, and removal is not easy.

This convenient cutting tool shaves the bushings off, removing nearly all the rubber thereby greatly simplifying the bushing removal process.



相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2061002

您正在查看的产品与这些编号存在交叉引用关系

Trailing arm bushing installation tool. 1 req'd per lifetime.



Fits:
Porsche 911/912/930 1965-89

This tool allows installation of the trailing arm bushing without removing the arms from the car, and without a shop press. Can be used for installation rubber bushings as well as our Monoball Cartridges (hyperlink).

Recommended for use in combination with Split Bushing Removal Tool part #2020903

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2020904

2020904

90133105900

您正在查看的产品与这些编号存在交叉引用关系