弹簧板

弹簧板盖通常会生锈，更换它们会给您带来更好的驾驶体验。

适合:
保时捷911（1965-89年）
保时捷 930 1975-77

图表参考编号 29

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90133315300

您正在查看的产品与这些编号存在交叉引用关系

弹簧板盖通常会生锈，更换它们会给您带来更好的驾驶体验。

适合:
保时捷911（1965-89年）
保时捷 930 1975-77

图表参考编号 29

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90133315300

您正在查看的产品与这些编号存在交叉引用关系

Adjustable spring plate Rear. Porsche 911 1976-86 915 Gear Box

Spring plate normally rust, replacing them will give you a better ride.



Fits:
Porsche 911 1974-86 915 Gearbox
Porsche 911 Turbo 1975-89

Price is Each

Click 'Zoom in' for large parts diagram.
Diagram Ref No.16

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91133300905

您正在查看的产品与这些编号存在交叉引用关系

SuperPro 替换弹簧板衬套比赛用推荐
更换保时捷零件编号 91133300900
4 件套

#超级职业选手#

适合：
保时捷 911 1974-89

使用聚氨酯悬架衬套替换您的汽车橡胶悬架衬套将为您带来：

- 更好的抓地力
- 恒定转向几何
- 延长轮胎寿命
- 转向更灵敏
- 悬架部件的使用寿命更长。

单击“放大”可查看大部件图。
适合图表上的第 16 号。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

SPF0242K

您正在查看的产品与这些编号存在交叉引用关系

Powerflex 弹簧板衬套。
适合弹簧板 OEM 零件号 90133300309
/90133300301.

4 件套



適用於:
保时捷 911 经典款（1968 - 1969 年）
保时捷 911 经典款（1969 - 1973 年）
保时捷 911 经典版（1974-1977 年）
保时捷 911 经典版（1974-1977 年）Turbo
保时捷 911 经典款（1977 年 - 1986 年）
保时捷 911 经典版（1978 - 1989 年）涡轮增压
保时捷 911 经典款（1987 - 1989 年）

适合图表上的第 16 号。


Powerflex。用聚氨酯悬架衬套替换您的汽车橡胶悬架衬套将为您带来以下好处：

- 更好的抓地力
- 恒定转向几何
- 延长轮胎寿命
- 转向更灵敏
- 悬架部件的使用寿命更长。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFR57-409

您正在查看的产品与这些编号存在交叉引用关系

Powerflex Black Series Spring Plate Bush.
Fits to spring plate OEM part number 90133300309
/ 90133300301.

SET OF 4



Fits:
Porsche 911 Classic (1968 - 1969)
Porsche 911 Classic (1969 - 1973)
Porsche 911 Classic (1974-1977)
Porsche 911 Classic (1974-1977) Turbo
Porsche 911 Classic (1977 - 1986)
Porsche 911 Classic (1978 - 1989) Turbo
Porsche 911 Classic (1987 - 1989)

Fits to No. 16 on the diagram.


Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFR57-409BLK

您正在查看的产品与这些编号存在交叉引用关系

Powerflex Heritage Collection Spring Plate Bush.
Fits to spring plate OEM part number 90133300309
/ 90133300301.

SET OF 4



Fits:
Porsche 911 Classic (1968 - 1969)
Porsche 911 Classic (1969 - 1973)
Porsche 911 Classic (1974-1977)
Porsche 911 Classic (1974-1977) Turbo
Porsche 911 Classic (1977 - 1986)
Porsche 911 Classic (1978 - 1989) Turbo
Porsche 911 Classic (1987 - 1989)

Fits to No. 16 on the diagram.


Powerflex Heritage Collection. For Modern Day Classics.

A range of bushes engineered for the road to compliment your classic car.

POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFR57-409H

您正在查看的产品与这些编号存在交叉引用关系

SuperPro 替换弹簧板衬套。
更换保时捷零件编号 91133300900
4 件套

#超级职业选手#

适合：
保时捷 911 1965-89

使用聚氨酯悬架衬套替换您的汽车橡胶悬架衬套将为您带来：

- 更好的抓地力
- 恒定转向几何
- 延长轮胎寿命
- 转向更灵敏
- 悬架部件的使用寿命更长。

单击“放大”可查看大部件图。
适合图表上的第 16 号。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

SPF0236K

您正在查看的产品与这些编号存在交叉引用关系

带钢坯支架的弹簧板衬套套件。



適用於:
保时捷 911 / 930 / 912 / 914 1965-89 年

使用我们的新衬套套件对这些后弹簧板进行急需的更新和升级。配有机加工的铝制外壳，旨在减少阻力，改善街道或赛道驾驶 911 的操控性，并考虑到使用寿命和耐用性。用 Delrin 替换橡胶衬套将在整个运动范围内保持最佳悬架几何形状，同时降低柔顺性以获得更直接的感觉。

衬套外壳采用 6061-T6 铝合金 CNC 加工而成
紧公差设计可增加刚性
耐用的阳极氧化表面可抗腐蚀
低摩擦 Delrin 衬套插入件
不锈钢衬套滚道和五金件
包括衬套滚道安装工具
直接更换 OEM 衬套和外壳
比工厂部件更耐用
镌刻 Rennline 徽标

赛车版弹簧板静音块
按 (4) 套出售，足够安装在一辆车的两侧。



適用於:
保时捷 911/912/930 所有 1965-89 年

使用高密度后弹簧板衬套为您的 911 恢复乘坐质量和后端稳定性。长时间使用，尤其是在猛烈驾驶时，OEM 衬套可能会损坏，导致后悬架松动。如果长时间忽视或在重载下驾驶，这些衬套最终会变形，导致弹簧板接触盖板。用我们 25% 刚度更高的装置更换您的工厂衬套将使弹簧板完全平稳地铰接，从而提高经典 911 中传奇后端的乘坐质量和性能。这些橡胶支架具有更高的“运动”硬度，是柔软的工厂支架和通常用于替换它们的实心/球形轴承之间的完美折衷。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90133300309

您正在查看的产品与这些编号存在交叉引用关系

Rear CamberMax Kit. Rear camber adjuster.
Sold per kit, 1 kit req'd per car.



Fits:
Porsche 911/912/930 1965-89
AL trailing arms only

Rear CamberMax kit simplifies 911 rear camber adjustment, making it easy to achieve aggressive negative camber settings of 3+ degrees. Instead of using the troublesome factory eccentric bolt, Rear CamberMax allows adjustment with a simple and precise screw.

Unlike the stock eccentric adjuster, Rear CamberMax allows adjustment with vehicle weight resting on the tires making it easy to read a camber gauge while turning the adjuster.

By making equal adjuster turns on both driver and passenger sides, quick changes can be made trackside even if a camber gauge is not available – try that with the factory eccentric adjuster!

Note – Fits factory spring plates and AL trailing arms only. Does not fit Sway-a-way plates or steel trailing arms.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2130900

您正在查看的产品与这些编号存在交叉引用关系

弹簧板硬件套件。

#大象赛跑#

适合：
保时捷 911 / 912 / 930 1969-89
带铝制拖臂


完成弹簧板安装

更换弹簧板时，您经常会发现硬件已磨损并需要更换。我们已按照工厂规格组装此套件，因此您无需自己寻找和采购零件。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2200000

您正在查看的产品与这些编号存在交叉引用关系

弹簧板硬件套件。

#大象赛跑#

适合：
保时捷 911 / 912 / 930 1969-89
带钢制拖臂


完成弹簧板安装

更换弹簧板时，您经常会发现硬件已磨损并需要更换。我们已按照工厂规格组装此套件，因此您无需自己寻找和采购零件。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2200001

您正在查看的产品与这些编号存在交叉引用关系

Spring plate PolyBronze bearings
For Porsche 911, 912, 930 1968-1989 Spring Plate SAW



PolyBronze bearings are superior to plastic bushing alternatives, here's why:

Suspension mounts are coarse sheet metal pressings. They tend to be out-of-round and have irregularities that deform ordinary polyurethane bushings, pinching and binding the friction surface. Polyurethane is "grippy" with an inherently high coefficient of friction and combined with pinching polyurethane bushings create a lot of friction. The result is a harsh ride and reduced tire adhesion.

PolyBronze have a rigid bronze bearing core that does not deform. The polyurethane jacket absorbs mount irregularities while the bronze inner bearing remains true, providing a free-moving machined-fit that rides on a precision race. Provided grease fittings make re-lubrication a breeze and a figure 8 groove keeps grease in place.

The combination delivers zero squeaks and friction-free suspension movement. Well suited to street or track, ride quality.

PolyBronze is a precision bronze bearing encased in a polyurethane jacket. The combination delivers a smooth-ride with the extreme performance of a metal bearing.

✔ No squeaks or binding
✔ Extremely smooth ride quality
✔ Easier to install than rubber bushings
✔ Integrated grease fittings and grooves

Note – 1967 spring plate bushings changed mid-year. The following '67 chassis numbers transitioned to the late style '69-'89 style bushes.

• '67 911 from Chassis Serial Number 307 325
• '67 912 from Chassis Serial Number 354 938
• '67 911 S from Chassis Serial Number 305 101 A

All earlier '67 chassis numbers use the early '65-'66 style bushes.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2061501

您正在查看的产品与这些编号存在交叉引用关系

Spring plate PolyBronze bearings.



Fits:
Porsche 911 1968-89 Spring Plate Stock


Want to experience precision driving, faster lap times, improved road feel and feedback?

Our patented PolyBronze suspension bearings set a new standard for performance, ride quality and ease-of-installation. Regular polyurethane/plastic suspension bushings are obsolete!

PolyBronze is a precision bronze bearing encased in a polyurethane jacket. The combination delivers a smooth-ride with the extreme performance of a metal bearing.

• No squeaks or binding
• Extremely smooth ride quality
• Easier to install than rubber bushings
• Integrated grease fittings and grooves

PolyBronze bearings are superior to plastic bushing alternatives, here's why:

Suspension mounts are coarse sheet metal pressings. They tend to be out-of-round and have irregularities that deform ordinary polyurethane bushings, pinching and binding the friction surface. Polyurethane is "grippy" with an inherently high coefficient of friction and combined with pinching polyurethane bushings create a lot of friction. The result is a harsh ride and reduced tire adhesion.

PolyBronze have a rigid bronze bearing core that does not deform. The polyurethane jacket absorbs mount irregularities while the bronze inner bearing remains true, providing a free-moving machined-fit that rides on a precision race. Provided grease fittings make re-lubrication a breeze and a figure 8 groove keeps grease in place.

The combination delivers zero squeaks and friction-free suspension movement. Well suited to street or track, ride quality.

NOTE:
1967 spring plate bushings changed mid-year. The following '67 chassis numbers transitioned to the late style '69-'89 style bushes.
'67 911 from Chassis Serial Number 307 325
'67 912 from Chassis Serial Number 354 938
'67 911 S from Chassis Serial Number 305 101 A
All earlier '67 chassis numbers use the early '65-'66 style bushes.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2061500

您正在查看的产品与这些编号存在交叉引用关系

Spring plate normally rust, replacing them will give you a better ride.
Price is Each.



Fits:
Porsche 911 1987-89 G50 Gearbox

Click 'Zoom in' for large parts diagram.
Diagram Ref No. 16

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91133300906

您正在查看的产品与这些编号存在交叉引用关系