经典 |Safari及避震悬架套件

Coilover brake line support bracket kit.
Fits:
Porsche 911 - 1965 to 1989
Standard front struts have welded-on brackets to support the brake hard line. Threaded body coilover struts and coilover sleeve conversion require the removal of these brackets, leaving the brake lines unsupported and prone to failure – always at the worst possible time.
- Our support bracket kit is an easy bolt-on support for the brake lines and bolts to existing threaded holes on the strut.
- Easy bolt-on – Attaches to the brake dust shield mounting holes using provided hardware. dust shields can be retained or removed.
- Prevents brake hard line flex / fatigue – Supports the brake hard line. Unsupported, the hard line will constantly flex and eventually leak.
- Quality throughout – Purpose made brackets are laser – cut from stainless steel and pre-formed. Top quality hardware is provided to complete the kit.
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)

Sold each - 2 required per car

Fits:
Porsche 911 - 1965 to 1989
Hypercoil Main Springs
Main Spring – The finest springs available, Hypercoil.
Choose from a broad selection of rates, here are a few popular front/rear choices:
Spring Type
- 200/300lb – Street performance, canyon carver
- 300/400lb – Autocross, Driver Education
- 400/600lb – Race
Will require a set of helper springs to be added
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)

单个出售 - 每轴需要 2 个
#大象赛跑#
適用於:
保时捷 911 - 1965 年至 1989 年
辅助弹簧的弹性系数很低,在汽车重量的作用下会破裂,其目的是当车轮在急转弯(抬起的车轮)、颠簸路面和千斤顶下完全下垂时,保持主弹簧的张紧。
在任何绞牙避震装置中,主弹簧在完全下垂时会失去张力,因此需要辅助弹簧 - 大多数绞牙避震装置都是如此。如果以下公式成立,则需要辅助弹簧:
转角重量 / 车轮比率 < 回弹行程
如果没有助手,主弹簧可能无法正确重新就位,并会导致该角的重量/高度突然改变。
主弹簧和辅助弹簧之间需要正确的弹簧分配器硬件。
辅助弹簧有多种直径和长度可供选择。
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)

use ONLY with QuickChange camber plates 2152200
1 kit, req'd per car.

Fits:
Porsche 911 / 912 / 930 / 914 1965-1989
Product description:
Coilover springs increase the diameter of front struts, often contacting the chassis such that the spring diameter limits the available camber adjustment range.
These extended-length upper spring perches solve the problem by moving the spring down where it won't contact the chassis.
Some cars can get over a degree of added camber adjustment range.
Extended-length perches are available for 2.25″ springs. You can add a 2.25″ to 2.5″ adaptor to use with 2.5″ springs.
Available with a 26mm ID for use only with QuickChange camber plates and with a 16mm ID for use with conventional camber plates.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
2280902
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 914 (1970-1976)

for stock and offset camber plates
1 kit, req'd per car.

Fits:
Porsche 911 / 912 / 930 / 914 1965-1989
Product description:
Coilover springs increase the diameter of front struts, often contacting the chassis such that the spring diameter limits the available camber adjustment range.
These extended-length upper spring perches solve the problem by moving the spring down where it won't contact the chassis.
Some cars can get over a degree of added camber adjustment range.
Extended-length perches are available for 2.25″ springs. You can add a 2.25″ to 2.5″ adaptor to use with 2.5″ springs.
Available with a 26mm ID for use only with QuickChange camber plates and with a 16mm ID for use with conventional camber plates.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
2280904
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 914 (1970-1976)

Sold each - 2 required per car

Fits:
Porsche 911 - 1965 to 1989
Hypercoil Main Springs
Main Spring – The finest springs available, Hypercoil.
Choose from a broad selection of rates, here are a few popular front/rear choices:
Spring Type
- 200/300lb – Street performance, canyon carver
- 300/400lb – Autocross, Driver Education
- 400/600lb – Race
Will require a set of helper springs to be added
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)

1 pair req'd per car.

Fits:
Porsche 911/912/930 1972-89
Coilover springs do not fit into the top of the tapered chassis cavities where the rear shocks mount.
These extended-length upper spring perches solve the problem by moving the spring down where it doesn't contact the chassis.
The perches are available for 2.25″ springs. Or you can add a 2.25″ to 2.5″ adapter to use 2.5″ springs.
They have a 14mm ID to fit Von Shocks, Bilstein RSR, HD, and Sport shocks.
Also available Super Extended Length Upper Perches for '65-'71 cars.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
2280900
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)

单独出售 - 每辆车需 2 个
#大象赛跑#
適用於:
保时捷 911 - 1965 年至 1989 年
超线圈主弹簧
主弹簧 – 市面上最优质的弹簧,Hypercoil。
有多种价格供您选择,以下是一些受欢迎的前/后选择:
弹簧类型
- 200/300lb – 街头表演,峡谷雕刻
- 300/400 磅 – 汽车越野赛、驾驶员教育
- 400/600 磅 – 比赛
需要添加一组辅助弹簧
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)

前后 4 件套。该套件包括更大的 18 毫米球接头和锁环
#复古线#
適用於:
1969 年至 1989 年的保时捷 911
适用于保时捷 911(1969-1989 年)的 Safari 风格碎石悬挂减震器套件(前部和后部)
这款专为“碎石”越野设置的高性能悬架减震器套件可让您的保时捷 911 走出人迹罕至的道路。这套完整套件包括四个减震器(前部和后部),经过精心设计,可在具有挑战性的地形上提供出色的耐用性、控制力和性能。
主要特点:
狩猎风格设计:专为崎岖的越野探险而设计。
增强组件:包括坚固的 18 毫米球接头和锁环,具有卓越的强度和使用寿命。
精确贴合:专门设计,适合 1969 年至 1989 年的保时捷 911 车型。
通过这项终极悬架升级,将您的经典 911 改造成一台征服碎石的机器。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
CLP12-1002
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)

前后 4 件套。该套件包括更大的 18 毫米球接头和锁环
#复古线#
適用於:
1969 年至 1989 年的保时捷 911
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
CLP12-1004
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)