合金/银色内饰

Rennline 铝锁/旋钮套装。
光滑边框



適用於:
保时捷 911 1974-84 全部

这款漂亮的 4 件式铝坯锁/旋钮套件将真正装点您的 911 或 928 内饰。它们由航空级铝材加工而成，阳极氧化成缎面，并配有全不锈钢硬件。每个套件都配备了改造驾驶员侧和乘客侧车门所需的所有组件。

注意：图片可能无法显示实际产品。

Rennline 铝制下仪表板盖

适合:
保时捷 911/912/930 全部 1965-84 年
适用于 LHD（左侧驾驶）汽车


这款超轻仪表板盖专为修饰您 911 赛车简洁的仪表盘而设计。这款一体式盖板从上盖板向下覆盖了整个仪表盘下半部分。仪表盘仅带有点火孔和安装孔，安装时可轻松添加定制孔。所有配件均为不锈钢材质，安装简便。提供拉丝或黑色粉末喷涂两种表面处理。

注意：安装时必须拆除仪表板衬垫和手套箱。

注意：图片可能无法显示实际产品。

Rennline dash backdate kit.



Fits:

Porsche 911/912/930 1969-89

If you have a '69-'89 911/912/930 chances are the lower dashboard is looking pretty rough. Typically, the foam padding is peeling away at the corners, the Radio/HVAC openings are sagging, the plastic bits and pieces are fading, the glovebox door is misaligned, and the list goes on. We've seen countless restorations and resto-mods that are absolutely flawless until you sit in the car and are faced with that gloomy factory dash. This is an area that really bothered us in our own restorations, so we finally developed a solution… The Rennline Dash Backdate Kit.



The Rennline Dash Backdate kit is a fascia that installs in place of all that OEM ugliness. It does away with the original foam padding, the glovebox door, the seatbelt warning light, and all the other non-necessities. In their place is a beautiful fascia that incorporates a polished extrusion similar to that of the early 911's but in one full length rather than the broken-up sections. Also reminiscent of the early 911's are the extrusion inserts which are available in a number of different options from carbon fiber or basketweave to walnut or stainless steel. This may very well be the final piece of your restoration/resto-mod puzzle. *Note – You switch locations may differ from photos. Headlight Knob included; other knobs available separately.



This kit includes

· Dash Overlay

· Polished Extrusion and Extrusion End Pieces

· Extrusions Insert (choose your option)

· Billet HVAC Control Panel and Polished Trim

· Billet Ignition Switch Bezel

· Billet Headlight Knob with Backdate Bezel

· Installation Hardware



Installation is relatively straight forward and involves the following steps:

Removing your glovebox and all accessories from the dashboard.
The Rennline Dash Backdate kit comes with provisions for the early HVAC Control, ignition switch, and headlight switch. If you would like to retain other switches, then you would need to drill the necessary holes into the dash overlay.
If you would like installation a radio, there is a perforated punch out in the extrusion. You would just need to cut the hole in the extrusion insert
Install the fascia over the existing dash frame using the supplied self-drilling hardware
Install the extrusion to the fascia using the supplied flat head sheet metal screws
Slide inserts into place
Install extrusions end caps
Install Accessories

窗户开关环绕铝。
以 3 件为一套出售。

适合:
保时捷 911 - 1974 年至 1989 年
保时捷 964 - 1989 年至 1994 年
保时捷 993 - 1994 年至 1998 年



相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

964613621

您正在查看的产品与这些编号存在交叉引用关系

窗户开关环绕铝。

以 3 件为一套出售。

适合
保时捷 911 - 1974 年至 1989 年
保时捷 964 - 1989 年至 1994 年
保时捷 993 - 1994 年至 1998 年

保时捷 911/964 车窗升降器开关装饰套件

使用这款优质的车窗调节器开关装饰套件来增强您的保时捷 911/964 内饰，其设计旨在打造时尚精致的外观。

套装包括： 3 个装饰框架：2 个用于驾驶员侧，1 个用于乘客侧。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

911680EWS911

您正在查看的产品与这些编号存在交叉引用关系