专用工具

Filling pump for Transmission fluid for All Porsche Classic models






相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PCG72191660

您正在查看的产品与这些编号存在交叉引用关系

Four way dashboard tool used to install and remove switch rings. Also works on radios, wipers, power switches and tenax fasteners.



Can be used with all models.

Hand lamp torch for all Porsche vehicles



Hand lamp designs are rarely as stunning as this: This new edition is based on an original hand lamp that was part of the accessories catalog for the Porsche 356 back in 1963. Featuring LED lights with two different lighting modes and battery operation, this hand lamp combines classic design with modern technology. The hand lamp also has a rubber-coated magnet for securely attaching it to the vehicle. Another eye-catching feature is the leather case embossed with the Porsche Crest. The design of the case is based on the original seat design from the Porsche 356, offering the perfect combination of timeless design and modern technology.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

64472260101

您正在查看的产品与这些编号存在交叉引用关系

Hylomar Gasket 3400 是一种改良的厌氧固化柔性密封剂，设计用于固化后成为现场成型 (FIP) 垫片。固化后的化合物具有良好的耐高温性和高抗磨损性。当化合物与金属离子接触并处于厌氧条件下时，固化开始。固化速度和最终强度取决于所连接的金属和使用组件的温度。发动机运转产生的热量将加速固化。

典型应用
Hylomar Gasket 3400 可用作机加工表面之间的垫片化合物。它非常适合用于密封发动机和传动部件上的配合面，因为这些部件必须耐高温、耐振动。

使用说明
Hylomar Gasket 3400 应涂抹在干净、干燥且无油污或油脂等污染物的表面上。该化合物可从筒状物、手风琴包或丝网印刷系统中手动分配。一旦涂抹，应尽快组装接头。任何多余的化合物都可用浸有丙酮或其他合适溶剂的干净布轻松擦去外表面。

典型物理特性：

未固化产品
成分：甲基丙烯酸甲酯
颜色：黄色
粘度@25°C / Brookfield Spindle 6 @ 2.5rpm：100,000cps
25°C 时的比重：1.10 g/ml
溶剂含量：无

比重（g/ml）@25°C：1.04
闪点： >100°C
保质期：1 年 @ 4° 至 25°C

固化产品
处理时间：40分钟
功能固化时间：4 – 6 小时
完全固化时间：24 – 72 小时

剪切强度：1.5 N/mm²
低碳钢/低碳钢 BS 5350 第 C5 部分
铝/铝 BS 5350 第 C5 部分

温度范围：-40°至150°C

减震器安装工具。
与减震器 34-001158 配合使用



相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

14-244148

您正在查看的产品与这些编号存在交叉引用关系

保时捷油桶

#保时捷#

带有保时捷徽章标志的保时捷 5 升燃油罐。

适合：
所有保时捷车型（美国除外）

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PCG80070300

您正在查看的产品与这些编号存在交叉引用关系

The perfect base for a Porsche enthusiast's favourite place: the velour mats in iconic designs for the garage or workshop. Available in 917 Salzburg design, Heritage design, Martini Racing design and 75 years of Porsche.



Details:
- Velour mat with non-slip rubber underside
- Black all-round edging made of high-quality nubuck leather
- Size: 70 x 140 cm

Please Note: The Porsche gift / collection range is subject to availability from the supplier and may take up to anything between 14 - 30 days for delivery if the item is not in stock in our supplier's warehouse.

Porsche Classic assembly gloves.



Sturdy assembly gloves (one pair) in a design characteristic of Porsche Classic, for use in the workshop or in the event of a breakdown. In particular, the parts of the gloves frequently put under significant strain have been heavily reinforced to ensure a good grip. The PORSCHE logo superimposed on the back of the hand in durable, black rubber is reminiscent of seat fabric designs well known from their use in classic vehicles. The hook-and-loop fastener also bears the PORSCHE logo. The rear edge of the hand features an integrated magnet to help with the fitting of screws and other small magnetic parts.

Certified as personal protective equipment (PPE) against mechanical risks according to DIN EN 388 (2 1 1 1 X).

The screws shown are for demonstration purposes only and are not included in the scope of delivery.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PCG9110

您正在查看的产品与这些编号存在交叉引用关系