电线束

Fits:
Porsche 911 / 912 - 1969 Left Hand Drive (LHD)
Complete main harness for the 1969 left hand drive (LHD) 911/912 with original spiral colour coded wiring.
Harness will exactly fit like the original with wire tube and oil resistant tape as original.
Harness comes with detailed connection instructions.
Fusebox wiring bundled with waxed lacing wire.
Shown fuseboxes are not included and need to be ordered separately
As original coloured wiring.
Original neoprene terminal sleeves used (no shrink wrap)
Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53
Gasoline, oil, battery acid, engine coolant resistant.
High flex sleeving is very resistant to solvents and free of halogen, sulphur and phosphorous.
Special order made to order parts please allow 2 – 4 weeks
Handmade to concourse quality.
Click 'Zoom in' for large parts diagram.
Diagram ref no 2
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90161200102
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
#复古线#
適用於:
保时捷 911 / 912 - 1969 年右驾版 (RHD)
1969 年右侧驾驶 (RHD) 911/912 的完整主线束,带有原装螺旋彩色编码线路。
线束将与原装线管和耐油胶带完全贴合。
线束附带详细的连接说明。
保险丝盒接线用蜡绑带线捆绑。
所示保险丝盒不包含在内,需要单独订购
与原有彩色线路一样。
使用原装氯丁橡胶端子套(无收缩包装)
高品质柔性汽车级线束,符合 ISO6722:2002 / DIN72551/6 / EEC 指令 2000/53
耐汽油、油、电池酸、发动机冷却液。
高柔性套管具有很强的耐溶剂性,并且不含卤素、硫和磷。
特殊订单定制零件请预留 2 - 4 周
手工制作,确保品质。
单击“放大”可查看大部件图。
图表参考编号 2
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90161200102
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)

Fits:
Porsche 911 - 1971 to 1973
Complete main harness with original colour coded wiring.
Runs from front fusebox to dashboard and harness will exactly fit like the original.
Wire tube and oil resistant tape are as original and terminals have rubber sleeves.
Harness comes with detailed connection instructions.
• 2 x Single bulb holder for headlight signal lights included.
• Fuel pump connector, boot and cable entry grommet included.
As original coloured wiring.
Original neoprene terminal sleeves used, (no shrink wrap)
Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53
Gasoline, oil, battery acid, engine coolant resistant.
High flex sleeving is very resistant to solvents and free of halogen, sulphur and phosphorous.
Special order made to order parts please allow 2 – 4 weeks
Handmade to concourse quality.
Click 'Zoom in' for large parts diagram.
Diagram ref no 2
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
9116120
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)


Fits:
Porsche 911 / 912 - 1965 to 1989
Porsche 914
Protective sheathing cover for fuel ventilation lines and wiring harness
Click 'Zoom in' for large parts diagram.
Diagram ref no 42
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 914 (1970-1976)
- Porsche 912E 4CYL 1976
Connects to the engine and tunnel harness and includes a socket for the auxiliary start-up relay and speed switch. Also includes two grommets for panel pass through. This version is compatible with Bosch voltage regulators. *Sporto connector housing not included*

Fits:
Porsche 911 1971-73
Click 'Zoom in' for large parts diagram.
Diagram ref no 4
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91161200410
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
适合:
保时捷 911/ 912 - 1965 年至 1974 年
前行李箱内的线束,在行李箱左侧连接至主线束(用于引擎盖内的双灯)
与原有彩色线路一样。
使用原装氯丁橡胶端子套管(无收缩包装)
非常高质量的柔性汽车级线束,符合 ISO6722:2002 / DIN72551/6 / EEC 指令 2000/53
耐汽油、油、电池酸、发动机冷却液。
高柔性套管,耐溶剂性极佳,不含卤素、硫和磷。
手工制作,品质优良。
图表参考编号 16
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90161204200
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Routed from the front fuse panel and gauges to the engine compartment and rear lights.

Fits:
Porsche 911 1972-73
Click 'Zoom in' for large parts diagram.
Diagram ref no 3
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91161200121
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
適用於:
保时捷 911 - 仅限 1973 年
1973 年的隧道线束有点特殊,因为出于某种原因,保时捷决定用胶带粘贴 1973 年的隧道线束,而不是使用 PVC 导管。
在 PET 目录中,该线束具有与 1972 年版本相同的零件编号。
完整的隧道线束,带有原装彩色编码线路。从前保险丝盒和仪表穿过隧道到发动机舱。
该线束与原装线束完全贴合。
线管和防油胶带与原装一致。端子有橡胶套,线束附带详细的连接说明。包括两个新的 6 极公连接器和 1 x 14 极母连接器。
该线束采用胶带粘贴,而不是 1973 年款所用的 PVC 线套管。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91161200121
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)

Fits:
Porsche 911 / 912 - 1969
Complete 911 tunnel harness with original spiral colour coded wiring.
Harness will exactly fit like the original with wire tube and oil resistant tape as original.
Fusebox wiring is bundled with waxed lacing wire. Terminals have rubber sleeves.
Harness comes with detailed connection instructions. This harness has the three only for 69 model used round connectors (female-female, no longer available, to be re-used from your original harness)
Special order made to order parts please allow 2 – 4 weeks
Handmade to concourse quality.
Click 'Zoom in' for large parts diagram.
Diagram ref no 1
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
901612003
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)

Fits:
Porsche 911 - 1972 to 1973
Complete tunnel harness with original colour coded wiring.
Runs from front fusebox / gauges through tunnel to the engine bay.
Harness will exactly fit like the original.
Wire tube and oil resistant tape as original and the terminals have rubber sleeves.
Harness comes with detailed connection instructions.
2 x new 6 pole male connector , 1 x 14 pole male connector, fuel pump connector (rear) rubber sleeve and grommet included.
Special order made to order parts please allow 2 – 4 weeks
Handmade to concourse quality.
Click 'Zoom in' for large parts diagram.
Diagram ref no 1
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
9116120
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)

Fits:
Porsche 912 - 1969
Complete 912 tunnel harness with original spiral colour coded wiring.
Harness will exactly fit like the original with wire tube and oil resistant tape as original.
Fusebox wiring is bundled with waxed lacing wire. Terminals have rubber sleeves.
Harness comes with detailed connection instructions. This harness has the three only for 69 model used round connectors (female-female, no longer available, to be re-used from your original harness)
Special order made to order parts please allow 2 – 4 weeks
Handmade to concourse quality.
Click 'Zoom in' for large parts diagram.
Diagram ref no 1
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90261200300
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)

適用於:
保时捷 911 1971-83
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91161203201
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC

適用於:
保时捷 911 - 1969 年至 1989 年
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91161210401
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
適用於:
1969 年保时捷 911 或 912
完全准备好的 911 1969 前线束,带有 2 x 6 极公连接器和继电器底座(用于喇叭),以及仅适用于 1969 年的粗正极线。
• 给系带钢丝打蜡,且每根钢丝的长度合适。
• 从保险丝盒延伸至左、右挡泥板/左清洗泵。
• 原装彩色编码线路。
• 线束将与原装线束完全贴合。
• 电线管、耐油胶带为原装。
• 端子带有橡胶套。
• 包括 2 个新公连接器和继电器插座。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90161205000
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
配有模制连接器
包括用于危险开关背面的 8 位置连接器外壳。

適用於:
保时捷 911 1970-1972
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91161201400
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)

適用於:
保时捷 911 1973-1984
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91161201430
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
线束——保时捷汽车的精密电气连接
线束是保时捷电气系统的支柱。它们连接并输送关键部件(从照明和传感器到发动机管理系统和信息娱乐系统)之间的电力,确保所有部件按设计正常运行。合适的线束可确保整车可靠的电气性能、信号完整性和安全性。
Design911 为保时捷车型提供各种原装高品质线束,包括 911、Boxster、Cayman、Cayenne、Macan 和 Panamera。每条线束都经过精心设计,确保精准、可靠、耐用,符合预期。
线束起什么作用?
线束是电线、连接器和端子的复杂组件,旨在:
- 在电气系统之间传输电力和数据。
- 通过绝缘、有序的布线保护电路。
- 将多根电线组合成一个统一的组件,简化安装和维护。
- 确保传感器、ECU、灯光和其他模块之间的正确通信。
在现代保时捷中,线束在实现先进技术方面发挥着至关重要的作用——从自适应照明和牵引力控制到舒适和娱乐系统。
线束为何会发生故障?
尽管设计时考虑到了长寿命,线束仍可能因以下原因而性能下降或发生故障:
- 受热或发动机振动导致绝缘层磨损。
- 连接器和端子受潮或腐蚀。
- 啮齿动物造成的损坏或发动机运转造成的物理磨损。
- 电气过载或短路损坏内部接线。
- 之前的维修或不良修改影响了性能。
线束故障的迹象包括灯光闪烁、间歇性电气故障、仪表板警告或整个系统故障。
为什么要更换故障线束?
更换损坏的线束可恢复正常的电气性能,消除间歇性问题,并防止控制模块或传感器受到昂贵的损坏。
更换的好处包括:
- 恢复电力输送和跨系统通信。
- 提高可靠性和防止短路或火灾的能力。
- 消除诊断故障和警告灯。
- 采用制造商标准组件进行精密配合安装。
该系列中的每条线束均采用高级材料和连接器制造,确保精确配合、耐腐蚀和长期可靠性。