专用工具

Connector removal tool - for VAG, Porsche

For the removal of VAG & Porsche push and pull connectors.

• For the removal of VAG and Porsche connectors.
• Connectors are found on MAF sensors, coil packs, headlights, fog lights, level sensors, map sensors etc.
• Fits directly onto the push and pull connectors.
• Black plastic handle for easy grip.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

6547

您正在查看的产品与这些编号存在交叉引用关系

Connector removal tool long series - for VAG/Porsche

For the removal of VAG and Porsche connectors found on MAF sensors, coil packs, headlights, fog lights, level sensors, map sensors etc.

• Fits directly on to the push and pull connectors and opens the locking tabs as pressure is applied.
• Applications include MAF sensors, coil packs, MAP sensors, CPS sensors and light connectors.
• Soft grip T-handle.
• 20mm offset head, 160mm long. EU Registered Design.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

7859

您正在查看的产品与这些编号存在交叉引用关系

Filling pump for Transmission fluid for All Porsche Classic models






相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PCG72191660

您正在查看的产品与这些编号存在交叉引用关系

Four way dashboard tool used to install and remove switch rings. Also works on radios, wipers, power switches and tenax fasteners.



Can be used with all models.

Hand lamp torch for all Porsche vehicles



Hand lamp designs are rarely as stunning as this: This new edition is based on an original hand lamp that was part of the accessories catalog for the Porsche 356 back in 1963. Featuring LED lights with two different lighting modes and battery operation, this hand lamp combines classic design with modern technology. The hand lamp also has a rubber-coated magnet for securely attaching it to the vehicle. Another eye-catching feature is the leather case embossed with the Porsche Crest. The design of the case is based on the original seat design from the Porsche 356, offering the perfect combination of timeless design and modern technology.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

64472260101

您正在查看的产品与这些编号存在交叉引用关系

Hylomar Gasket 3400 是一种改良的厌氧固化柔性密封剂，设计用于固化后成为现场成型 (FIP) 垫片。固化后的化合物具有良好的耐高温性和高抗磨损性。当化合物与金属离子接触并处于厌氧条件下时，固化开始。固化速度和最终强度取决于所连接的金属和使用组件的温度。发动机运转产生的热量将加速固化。

典型应用
Hylomar Gasket 3400 可用作机加工表面之间的垫片化合物。它非常适合用于密封发动机和传动部件上的配合面，因为这些部件必须耐高温、耐振动。

使用说明
Hylomar Gasket 3400 应涂抹在干净、干燥且无油污或油脂等污染物的表面上。该化合物可从筒状物、手风琴包或丝网印刷系统中手动分配。一旦涂抹，应尽快组装接头。任何多余的化合物都可用浸有丙酮或其他合适溶剂的干净布轻松擦去外表面。

典型物理特性：

未固化产品
成分：甲基丙烯酸甲酯
颜色：黄色
粘度@25°C / Brookfield Spindle 6 @ 2.5rpm：100,000cps
25°C 时的比重：1.10 g/ml
溶剂含量：无

比重（g/ml）@25°C：1.04
闪点： >100°C
保质期：1 年 @ 4° 至 25°C

固化产品
处理时间：40分钟
功能固化时间：4 – 6 小时
完全固化时间：24 – 72 小时

剪切强度：1.5 N/mm²
低碳钢/低碳钢 BS 5350 第 C5 部分
铝/铝 BS 5350 第 C5 部分

温度范围：-40°至150°C