ball joint 原装 Porsche 零部件 91134732204

适合左侧或右侧。价格为单个价格。



適用於:
保时捷 911 1965-89非 Turbo 车型
保时捷 914 1970-76

转向齿条通过两个横拉杆控制前轮，横拉杆末端为可更换的接头 - “横拉杆端”，与旋转轮毂连接。这些接头最终会磨损，导致转向和操控问题，并成为英国 MOT 的缺陷点，可能也是其他国家法定检验的缺陷点。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91134732204

您正在查看的产品与这些编号存在交叉引用关系

转向横拉杆用六角头螺栓。带锁销孔。
每件均已售出。

适合:
保时捷 911 1969 - 1989
保时捷 914 1970 - 1976

图表参考编号 10

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91134732701

您正在查看的产品与这些编号存在交叉引用关系

Fits to Left or Right side. Price is for each



Fits:
Porsche 911 1965-89 Not Turbo models
Porsche 914 1970-76

The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91134732204

您正在查看的产品与这些编号存在交叉引用关系

转向横拉杆端。

#保时捷#

適用於:
保时捷 914（1970 年 - 1976 年）
保时捷 914/6（1970 - 1972 年）
保时捷 911 F（1965 - 1973 年）（也适用于 912）
保时捷 911 G（1974 年 - 1983 年）
保时捷 911 Turbo（1975 年 - 1989 年）
保时捷 911 Carrera（1984 年 - 1989 年）
保时捷 959（1987 - 1988 年）

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91134732204

您正在查看的产品与这些编号存在交叉引用关系

Spring plate bush kit
1 kit required per car



Fits
Porsche 911 - 1965 to 1989
Porsche 930 turbo - 1975 to 1989
Porsche 914 - 1970 to 1976
Porsche 912 - 1976 to 1976


Precision Steering Under Pressure

Our top-performing bump steer solution is super strong and provides the sharpest, most predictable steering response. It eliminates steering knuckle twist induced toe steer and can be used on raised spindles of any height.

Double steering knuckle – Holds tie rod end between two steering knuckles to eliminate knuckle flex regardless of bump steer spacer length.

Long bump steer spacers (required with raised spindles) place bending loads that twist stock steering knuckles. Twist causes undesired toe steer.

Second steering knuckle is welded to the strut body

Bump steer adjustable – allows massive bump steer adjustment range in .125 inch increments. Double shear mounting provides solid support for even the longest bump steer spacing.

Rod End – Weather sealed precision rods ends included work with regular turbo tie rods. Included boots to seal out dirt and and water for extended life.

Our purpose-made rod ends are extra long to ensure proper threaded engagement with standard turbo tie rods

Spindle height – Kits available for 19mm, 30mm, 40mm spindle height.
Kits are easily modified for use with essentially any spindle height.



相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

211090

您正在查看的产品与这些编号存在交叉引用关系