catch 原装 Porsche 零部件 91110816700

Closing brackets to mount the air filter housing to the hopper of the intake air, suitable for carburettor and injection engines.



Fits:
Porsche 911 1972-1977

Click 'Zoom in' for large parts diagram.
Diagram ref no 10

Price shown is for each.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91110816700

您正在查看的产品与这些编号存在交叉引用关系

Heater Hose Pipe Regulator Housing to Heat Exchanger.
For cars with Mechanical Injection only.



Fits:
Porsche 911 T/E/S / 911 Carrera 2.7 1972-74

Click 'Zoom in' for large parts diagram.
Diagram ref no 27

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91110815100

您正在查看的产品与这些编号存在交叉引用关系

Complete 40mm Carburetor Kit for Porsche 911 Engines

Complete kits include pre-jetted and sized carburetors manifolds, linkage, K&N Watershield air cleaners, pressure control unit, heat insulator kit, oil tank breather, fuel line & filter, clamps, injector plugs (as needed), power brake check valve (as needed) and complete installation instructions.

Also available 40mm Carburetors Only

Special order product please allow 10 -14 days for delivery

The PMO carburetor was designed from the beginning to be a state-of-the art carburetor. They start off with a casting designed around a 50mm throttle plate and downsized to 46 and 40mm to achieve three different sizes. They use an excellent material and process: A-356 aircraft aluminum and permanent mold casting. Permanent mold casting is a preferred method in the aerospace industry. This compares favorably with conventional carburetors, including Weber, which are die cast pot metal.

Since they designed a larger carburetor from scratch, the air entry and flow is much greater than the three barrel Weber. This is accomplished by having larger main barrels in the throttle body, tapering the top covers and then installing larger diameter velocity stacks of corresponding taper. This maintains the boost from the velocity stacks down to the exact point where it operates on the auxiliary venturis.

Ball Bearing Supported Single Throttle Shaft
Replaceable Idle Air Jets
Float Bowl Sight Glass
Full Range of Venturis, Jets, Emulsion Tubes
Float Bowl & Float Improvements
Two Sizes of Auxiliary Venturis
Heat Treated Aluminum Permanent Mold Castings

NOTE: PMO recommends using their Carburetor Insulator Kit, between the head and the manifold when installing these carburetors. Insulators restrict heat transfer from the head to the carburetor float bowl to prevent percolation. The kit includes insulators for two carburetors, gaskets, and longer stainless steel head studs. When purchasing Carburetor Insulator, Manifold to Head, Kit. Include information of carburetor size, year/type of head, and intake port diameter.

We recommend that upon removing manifolds, simply apply liquid wrench to the base of the stud and let stand for a day or two before attempting to remove the head studs.

PMO CARBURETOR ORDER FORM: CLICK HERE

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

911108124

您正在查看的产品与这些编号存在交叉引用关系

Complete 46mm Carburetor Kit for Porsche 911 Engines

Complete kits include pre-jetted and sized carburetors manifolds, linkage, K&N Watershield air cleaners, pressure control unit, heat insulator kit, oil tank breather, fuel line & filter, clamps, injector plugs (as needed), power brake check valve (as needed) and complete installation instructions.

Also available 46mm Carburetors Only

Special order product please allow 10 -14 days for delivery

The PMO carburetor was designed from the beginning to be a state-of-the art carburetor. They start off with a casting designed around a 50mm throttle plate and downsized to 46 and 40mm to achieve three different sizes. They use an excellent material and process: A-356 aircraft aluminum and permanent mold casting. Permanent mold casting is a preferred method in the aerospace industry. This compares favorably with conventional carburetors, including Weber, which are die cast pot metal.

Since they designed a larger carburetor from scratch, the air entry and flow is much greater than the three barrel Weber. This is accomplished by having larger main barrels in the throttle body, tapering the top covers and then installing larger diameter velocity stacks of corresponding taper. This maintains the boost from the velocity stacks down to the exact point where it operates on the auxiliary venturis.

Ball Bearing Supported Single Throttle Shaft
Replaceable Idle Air Jets
Float Bowl Sight Glass
Full Range of Venturis, Jets, Emulsion Tubes
Float Bowl & Float Improvements
Two Sizes of Auxiliary Venturis
Heat Treated Aluminum Permanent Mold Castings

NOTE:PMO recommends using their Carburetor Insulator Kit, between the head and the manifold when installing these carburetors. Insulators restrict heat transfer from the head to the carburetor float bowl to prevent percolation. The kit includes insulators for two carburetors, gaskets, and longer stainless steel head studs. When purchasing Carburetor Insulator, Manifold to Head, Kit. Include information of carburetor size, year/type of head, and intake port diameter.

We recommend that upon removing manifolds, simply apply liquid wrench to the base of the stud and let stand for a day or two before attempting to remove the head studs.

PMO CARBURETOR ORDER FORM: CLICK HERE

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

911108124

您正在查看的产品与这些编号存在交叉引用关系

PMO Electronic Fuel Injection (EFI) Throttle Bodies

The Same High Quality and Reliability Features Enjoyed by PMO Carburetors
• Permanent Mold Casting
• Sealed Ball Bearings to Maintain Radial Throttle Shaft Alignment
• Bellville Springs to Maintain Axial Throttle Shaft Alignment
• Available in 40mm, 46mm or 50mm Sizes
• Fits PMO Manifolds and uses PMO Linkage
• Uses PMO Watershield or ITG Air Filters
• Vacuum Taps on Every Bore With Billet Vacuum Manifold Available
• Integral Boss to Mount Delco Throttle Position Sensor (EFI only)
• Billet Fuel Rails for Bosch Style Injectors (3/4" x 16 tpi Female Threads. EFI only)
• Tapered 52mm Bore for Better Airflow

Complete Kit
PMO EFI Throttle Bodies, Air horns, Fuel Rails, PMO Manifolds, K & N Watershield Air Cleaners, PMO Linkage, Insulators, PMO Billet Vacuum Manifold, Delco Throttle Position Sensor

Throttle Bodies Only
PMO EFI Throttle Bodies, Air horns, Fuel Rails*
*All the other items to install the throttle bodies will be needed if bought separately.

PMO EFI THROTTLE BODY ORDER FORM: CLICK HERE

Special order item delivery time 10 -14 days, please specify the 40, 46 and 50mm size when ordering

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

911108EFI

您正在查看的产品与这些编号存在交叉引用关系

PMO Mechanical Fuel Injection (MFI) Throttle Bodies

The Same High Quality and Reliability Features Enjoyed by PMO Carburetors
• Permanent Mold Casting
• Sealed Ball Bearings to Maintain Radial Throttle Shaft Alignment
• Bellville Springs to Maintain Axial Throttle Shaft Alignment
• Available in 40mm, 46mm or 50mm Sizes
• Fits PMO Manifolds and uses PMO Linkage
• Uses PMO Watershield or ITG Air Filters
• Tapered 52mm Bore for Better Airflow

Complete Kit
PMO MFI Throttle Bodies, Air horns, PMO Manifolds, K & N Water shield Air Cleaners, PMO MFI Linkage, PMO Billet MFI Pump Stand

Throttle Bodies Only
PMO MFI Throttle Bodies, Air horns*
*All the other items to install the throttle bodies will be needed if bought separately.


PMO MFI THROTTLE BODY ORDER FORM: CLICK HERE

Special order item delivery time 10 -14 days, please specify the 40, 46 and 50mm size when ordering

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

911108MFI

您正在查看的产品与这些编号存在交叉引用关系

保时捷 911T ID40 Zenith 化油器（两件套）

健康）状况
已使用，未测试
二手零件不享有保修或保证，所有零件均按原样出售，这些零件应作为修复项目的一部分使用，安装前需进行检查和修复。二手零件不予退货或退款。

适合:
保时捷 911 1970-73 可安装至其他车型

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91110812303U

您正在查看的产品与这些编号存在交叉引用关系

保时捷 911T ID40 Zenith 化油器（两件套）

健康）状况
已使用，未测试
二手零件不享有保修或保证，所有零件均按原样出售，这些零件应作为修复项目的一部分使用，安装前需进行检查和修复。二手零件不予退货或退款。
适合:
保时捷 911 1970-73 可安装至其他车型

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91110812403U

您正在查看的产品与这些编号存在交叉引用关系

保时捷 911T ID40 Zenith 化油器（两件套）

健康）状况
已使用，未测试
二手零件不享有保修或保证，所有零件均按原样出售，这些零件应作为修复项目的一部分使用，安装前需进行检查和修复。二手零件不予退货或退款。

适合:
保时捷 911 1970-73 可安装至其他车型

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91110812402U

您正在查看的产品与这些编号存在交叉引用关系