RSS Torque Vector/Litronic Sensor Bracket Set for Front XL Inner Monoball. Porsche GT4 / 991 GT3/RS

GT3 Adjustable outer lower control arms – 2 Piece,
with adjustable caster puck.



Fits:
Porsche 991 Front Only (Does Not Fit 991 GT3)
Porsche 992 Front Only (Does Not Fit 992 GT3)
Porsche 981 Front And Rear


GT3 Lower Control Arms (LCA)

992 GT3 cars are equipped with a special front GT3 control arm that is two-piece and length-adjustable by fitting shims between the halves. The changeable length allows for aggressive camber settings and track width adjustment, increasing cornering grip and performance.
Unfortunately the stock 992 GT3 control arm cannot be fit to a non-GT3 992 because the ball joint end is completely different.
That’s why we created these GT3 type front lower control arms to fit the 992 C2, C4 and Turbo cars.
Our GT3 ERX LCAs for the 922 provides the same type front camber and track width adjustment for non-GT3 992 cars.

The GT3 ERX lower control arm is a system built up of three component parts, each ordered separately:
– GT3 ERX adjustable outer lower control arm
– GT3 adjustable inner lower control arm
– GT3 lower control arms shims (various thicknesses, stackable)

GT3 ERX Front Outer Lower Control Arms

Elephant Racing has developed an upgraded GT3 type front lower control arm for the non-GT3 992 cars. Our GT3 type arms have the correct ball joint style for fitment to 992 C2, C4 and Turbo cars. They do not fit 992 GT3 cars.

Like the factory lower control arms, the Elephant Racing outer arm has an integrated ball joint that is weather sealed. Unlike the factory lower control arms, the ball joint in the Elephant Racing arms is rebuildable and we offer the rebuild kit allowing you to renew the arm when needed.

The GT3 ERX LCAs have features to accept the factory height sensor and air deflectors.

The outer arms are sold as a left and right side pair, to be combined with our GT3 inner lower control arms – orderable separately.

These can be paired with a choice of GT3 lower control arms inner:
– Elephant Racing GT3 lower control arm inner rubber bushing
– Elephant Racing GT3 lower control arm inner spherical bearing


相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2180044

您正在查看的产品与这些编号存在交叉引用关系

GT3 Adjustable outer lower control arms – 2 Piece,
With rubber bushing.



Fits:
Porsche 992 Front Only
Does Not Fit 992 GT3


GT3 Lower Control Arms (LCA)

992 GT3 cars are equipped with a special front GT3 control arm that is two-piece and length-adjustable by fitting shims between the halves. The changeable length allows for aggressive camber settings and track width adjustment, increasing cornering grip and performance.
Unfortunately the stock 992 GT3 control arm cannot be fit to a non-GT3 992 because the ball joint end is completely different.
That’s why we created these GT3 type front lower control arms to fit the 992 C2, C4 and Turbo cars.
Our GT3 ERX LCAs for the 922 provides the same type front camber and track width adjustment for non-GT3 992 cars.

The GT3 ERX lower control arm is a system built up of three component parts, each ordered separately:
– GT3 ERX adjustable outer lower control arm
– GT3 adjustable inner lower control arm
– GT3 lower control arms shims (various thicknesses, stackable)

GT3 ERX Front Outer Lower Control Arms

Elephant Racing has developed an upgraded GT3 type front lower control arm for the non-GT3 992 cars. Our GT3 type arms have the correct ball joint style for fitment to 992 C2, C4 and Turbo cars. They do not fit 992 GT3 cars.

Like the factory lower control arms, the Elephant Racing outer arm has an integrated ball joint that is weather sealed. Unlike the factory lower control arms, the ball joint in the Elephant Racing arms is rebuildable and we offer the rebuild kit allowing you to renew the arm when needed.

The GT3 ERX LCAs have features to accept the factory height sensor and air deflectors.

The outer arms are sold as a left and right side pair, to be combined with our GT3 inner lower control arms – orderable separately.

These can be paired with a choice of GT3 lower control arms inner:
– Elephant Racing GT3 lower control arm inner rubber bushing
– Elephant Racing GT3 lower control arm inner spherical bearing


相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2180042

您正在查看的产品与这些编号存在交叉引用关系

GT3 ERX Inner lower control arm (LCA), Rubber Bushing Module.



Fits:
Porsche 996, 997, 991, 992 W/ GT3 Style Control Arms (Front/Rear),
Porsche Boxster, Cayman 1999>> W/ GT3 Style Control Arms (Front Only)

Elephant Racing has developed GT3 type inner lower control arms.
These are readily available and dimensionally identical to the factory parts. They can be mix-matched with the factory type inner/outer lower control arm and shims.
The Elephant Racing inner arm is offered in two flavors, GT3 Street Inner Lower Control Arm and GT3 Cup Inner Lower Control Arm. GT3 street is equipped with a rubber bushed central bushing and the GT3 Cup is equipped with a solid caster adjustable central bushing.
Our GT3 Street Inner Lower Control Arm has sport-hardness rubber bushings to provide upgraded control and driver feedback while still offering good road noise isolation.
Our GT3 Cup Inner Lower Control Arms uses weather sealed spherical bearings. These deliver superior precision, control, and performance. They will transmit a bit more road noise than rubber bushings.

These can be paired with a choice of GT3 outer control lower arms:
– Elephant Racing GT3 Street Outer Lower Control Arms
– Elephant Racing GT3 Cup Outer Lower Control Arms
– Factory GT3 Street Outer Lower Control Arms

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2180039

您正在查看的产品与这些编号存在交叉引用关系