在此输入您的增值税号,然后单击验证:
您的详细信息已经过验证。增值税号注册至:
,
。
现在,您的订单的增值税税率为零。我们保留在您提出订单请求后验证这些详细信息的权利,并在需要时恢复增值税。
您的增值税详细信息无法识别或无效。您的增值税号必须与上面指定的帐单国家/地区相匹配。当前指定为 。您无需输入增值税号的国家/地区代码部分,因为已在上面的帐单地址详细信息中选择了该部分。
增值税号查询服务目前已离线。请在下面的评论或特殊说明字段中提供您的增值税详细信息,我们将在您提出订单请求后应用增值税折扣。
检查车辆适配性
Kits
99633379225/1KIT
Product Information
It’s a suspension rubber mount that fits around the anti-roll bar to secure it to the rear axle and help control chassis movement.
SET OF 2. Two bushings (left and right) are typically required per vehicle.
Fits:
Porsche 986 Boxster 2.5L / 2.7L / 3.2L 1997 - 2005 Cars with Sport Suspension - Please choose by size
Porsche 987.1 Boxster 2005 - 2008 Cars with Sport Suspension
Porsche 996 C2 / C4 / C4S 1998 - 2005 *Cars with Sport Suspension - Please choose by size
Porsche 997.1 C2 / C2S / C4 / C4S 2005 - 2008 - Please choose by size
Diagram Ref No 2.
• Application: Rear anti-roll (stabilizer) bar bushing - fits around the 19.8 mm diameter stabilizer bar to mount it to the rear suspension subframe. Two bushings (left and right) are typically required per vehicle.
The anti-roll bar bushing cushions and secures the stabilizer bar to the rear suspension structure. This part helps maintain the correct position and movement control of the rear anti-roll bar, reducing unwanted body roll in corners and stabilizing the chassis during acceleration, braking, and steering.
Over time, the factory rubber in anti-roll bar bushings can harden, crack, or break down due to heat, age, and load cycles. Worn bushings can lead to:
• Increased body roll and reduced handling precision
• Clunking or knocking noises from the rear suspension
• Uneven tire wear
• Loose or sloppy cornering response
Replacing bushings restores correct fitment and suspension geometry, improving stability, road feel, and overall driving confidence. Spyder Performance
Replace the rear anti-roll bar bushings if you notice:
• Clunking or rattling from the rear suspension
• Excessive body lean when cornering
• Visible cracks, distortion, or missing rubber on existing bushings
• During suspension overhaul or anti-roll bar removal
• Elevated noise or vibration through the rear of the car
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99633379225
您正在查看的产品与这些编号存在交叉引用关系
Product Information
Rear stabilizer bar bush, Size: 19.8mmIt’s a suspension rubber mount that fits around the anti-roll bar to secure it to the rear axle and help control chassis movement.
SET OF 2. Two bushings (left and right) are typically required per vehicle.
Fits:
Porsche 986 Boxster 2.5L / 2.7L / 3.2L 1997 - 2005 Cars with Sport Suspension - Please choose by size
Porsche 987.1 Boxster 2005 - 2008 Cars with Sport Suspension
Porsche 996 C2 / C4 / C4S 1998 - 2005 *Cars with Sport Suspension - Please choose by size
Porsche 997.1 C2 / C2S / C4 / C4S 2005 - 2008 - Please choose by size
Diagram Ref No 2.
• Application: Rear anti-roll (stabilizer) bar bushing - fits around the 19.8 mm diameter stabilizer bar to mount it to the rear suspension subframe. Two bushings (left and right) are typically required per vehicle.
The anti-roll bar bushing cushions and secures the stabilizer bar to the rear suspension structure. This part helps maintain the correct position and movement control of the rear anti-roll bar, reducing unwanted body roll in corners and stabilizing the chassis during acceleration, braking, and steering.
Over time, the factory rubber in anti-roll bar bushings can harden, crack, or break down due to heat, age, and load cycles. Worn bushings can lead to:
• Increased body roll and reduced handling precision
• Clunking or knocking noises from the rear suspension
• Uneven tire wear
• Loose or sloppy cornering response
Replacing bushings restores correct fitment and suspension geometry, improving stability, road feel, and overall driving confidence. Spyder Performance
Replace the rear anti-roll bar bushings if you notice:
• Clunking or rattling from the rear suspension
• Excessive body lean when cornering
• Visible cracks, distortion, or missing rubber on existing bushings
• During suspension overhaul or anti-roll bar removal
• Elevated noise or vibration through the rear of the car
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99633379225
99633379225
99633379219
您正在查看的产品与这些编号存在交叉引用关系
关于此套件
该套件包括以下商品:
2 x 适用于保时捷 986 / 987 / 996 / 997 的后稳定杆衬套 19.8mm (99633379225/1)
产品车辆组
产品车辆组
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
€32.76 含 VAT
当前 €29.48 含 VAT
有现货 - 24 小时发货

