涡轮增压器冷却液管路、回流管路……保时捷 997 Turbo

所列装置可直接替换标准涡轮增压器（包括执行器）。

博格华纳编号 53169886736 / 53169886735。

適用於:
保时捷 993 Turbo

替代品
这些涡轮增压器可直接安装以替换您的工厂涡轮增压器。

单击“放大”可查看大部件图。
图表参考编号 1（左）或 2（右）

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99312301

您正在查看的产品与这些编号存在交叉引用关系

All units listed directly replace the standard KKK K16 Turbochargers,

Part No. 5316-970-6735 – Porsche Part No. 99312301351. R/H
Part No. 5316-970-6736 – Porsche Part No. 99312301451. L/H

STAGE 1 UPGRADE

High flow GT series 6 blade compressor wheel - CNC re-profiled compressor housing - 360 degree thrust bearing – left & right hand thread shaft & wheel, twin high temperature exhaust piston ring seals fitted.

These turbos are a direct installation in replacement of your factory turbos. K24 turbos are much larger then the factory K16 turbos found on the standard 993TT. The K24 Turbos can handle over 550 crank horsepower. Unlike most turbos on other vehicles, you will not sacrifice low end horsepower or torque, however gain a larger amount in the mid range and top end.

Approx achievable output - 550-600 bhp with the correct ECU re-map
These set should only be fitted by engine builders or tuners as other performance parts may be required

The prices listed are for turbo chargers supplied on an exchange basis. Your Turbo charger must be a serviceable unit. If required on an out right purchase (if you have no old unit available), please ask for quotation.

All units listed directly replace the standard KKK K16 Turbochargers,

Part No. 5316-970-6735 - Porsche Part No. 99312301351. R/H
Part No. 5316-970-6736 - Porsche Part No. 99312301451. L/H

STAGE 2 UPGRADE

These turbos are a direct installation in replacement of your factory turbos. K24 turbos are much larger then the factory K16 turbos found on the standard 993TT. The K24 Turbos can handle over 550 crank horsepower. Unlike most turbos on other vehicles, you will not sacrifice low end horsepower or torque, however gain a larger amount in the mid range and top end.

High flow Spec 5 blade compressor wheel - CNC re-profiled compressor housing - 360 degree thrust bearing - left & right hand thread shaft & wheel with cut back blades- twin high temperature exhaust piston ring seals fitted.

The prices listed are for turbo chargers supplied on an exchange basis. Your Turbo charger must be a serviceable unit. If required on an out right purchase (if you have no old unit available), please ask for quotation.

Output achieved 630 BHP & 890Nm Torque @ 4,500 Rpm & 1.1Bar Boost with the correct ECU re-map These set should only be fitted by engine builders or tuners as other performance parts may be required

The prices listed are for turbo chargers supplied on an exchange basis. Your Turbo charger must be a serviceable unit. If required on an out right purchase (if you have no old unit available), please ask for quotation.