减震器凹面垫圈。适用于保时捷 991.2 / 992.1 / 992.2  ❭  9P1412103

Rennline Clubsport 外倾板顶部安装套件。
2 件套



适合：
保时捷 991/981/718 2WD（GT3/GT4 除外）

无论您在街道还是赛道上使用汽车，最佳外倾角设置对于街道和赛道上激烈驾驶时的性能和轮胎磨损都至关重要。这些板是为希望获得额外外倾角而无需更换 GT3 式可调控制臂的 991/981 车主设计的。通过使用偏置轴承座，外倾角调整范围可以改变，在所有 OEM 等效设置下提供额外的 1.1 度外倾角。

这些支架由 6061-T6 铝坯在内部 CNC 加工而成，强度最高，重量最轻。精密的聚四氟乙烯衬里轴承通过两部分螺纹外壳固定，消除了使用卡环的外倾角板常见的问题，例如噪音过大和过早失效。这还可以最大限度地减少负载下的外倾角变化，这意味着在最重要的时候您可以拥有更精确的对准设置。

专为使用原厂减震器和任何与 OEM 支架配合使用的售后市场设置的汽车而设计，这是在您的 991/981 汽车中获得外倾角的最简单方法。此外，通过在支柱顶部而不是控制臂处进行外倾角更改，可以最大限度地减少主销后倾角的变化，从而更容易设置并最大限度地减少必要的修改。

• 出厂设置下负外倾角增加 1.1*，从而带来更大的调整范围
• CNC 加工外壳
• 与采用工厂支架的工厂和售后减震器/弹簧套件完全兼容
• 均衡轮胎磨损并同时最大化牵引力
• 精密聚四氟乙烯内衬球形轴承
• 降低顺从性可实现更精确的处理和对准

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

S54

您正在查看的产品与这些编号存在交叉引用关系

Rennline Race Spec Camber Plate FRONT Top Mount Set.
SET OF 2



Fits:
Porsche 991 / 981 / 718 2WD incl GT3/GT4 FRONT

If you are looking for maximum performance and adjustability from your 991/981 you are going to want to be in complete control of your camber settings. Designed to work with non-OEM suspension options such as JRZ, Moton and GT3/Cup struts, Rennline Race Spec Camber Plates will give you perfect combination of adjustability and durability.

this kit will fit the Cayman GT4 and 991 GT3 with OEM dampers.

These mounts are CNC machined in house from 6061-T6 billet aluminum for maximum strength while keeping weight to a minimum. Precision teflon lined bearings are held in place with a two-part threaded housing which eliminates the issues commonly associated with camber plates that utilize a snap ring such as excessive noise and premature failure. This also minimizes camber changes under load meaning you have more precise alignment settings when it matters most.

Designed for anyone from the weekend enthusiast to the dedicated track day veteren, these camber plates allow you to add camber in the optimum way. Swapping to GT3-style lower control arms can increase camber significantly, but it comes at the cost of reduced caster without replacing additional components. Our Race Spec Camber Plates solve this issue by adding camber at the top of the strut, minimizing geometry changes to other areas of the suspension system.

• 1.1* increase in negative camber
• CNC machined housings
• Designed for use with non-OEM style coilovers and struts
• Equalize tire wear and maximize traction at once
• Precision teflon-lined spherical bearing
• Reduced compliance results in more precise handling and alignment

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

S55

您正在查看的产品与这些编号存在交叉引用关系

减震器上部支撑架。前部。

#保时捷#

适合：
保时捷 991.1 C2 / C2S / C4 / C4S 2012-16
保时捷 991.2 C2 / C2S / C4 / C4S 017>>
保时捷 991 Turbo 2014>>
保时捷 981 Boxster 2012-16
保时捷 982 (718) Boxster 2017>>
保时捷 981C Cayman 2014-16
保时捷 982C Cayman 2017>>

单击“放大”可查看大部件图。
图表参考编号 3

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99134301502

您正在查看的产品与这些编号存在交叉引用关系