伦林

Rennline Race Spec Camber Plate FRONT Top Mount Set.
SET OF 2



Fits:
Porsche 991 / 981 / 718 2WD incl GT3/GT4 FRONT

If you are looking for maximum performance and adjustability from your 991/981 you are going to want to be in complete control of your camber settings. Designed to work with non-OEM suspension options such as JRZ, Moton and GT3/Cup struts, Rennline Race Spec Camber Plates will give you perfect combination of adjustability and durability.

this kit will fit the Cayman GT4 and 991 GT3 with OEM dampers.

These mounts are CNC machined in house from 6061-T6 billet aluminum for maximum strength while keeping weight to a minimum. Precision teflon lined bearings are held in place with a two-part threaded housing which eliminates the issues commonly associated with camber plates that utilize a snap ring such as excessive noise and premature failure. This also minimizes camber changes under load meaning you have more precise alignment settings when it matters most.

Designed for anyone from the weekend enthusiast to the dedicated track day veteren, these camber plates allow you to add camber in the optimum way. Swapping to GT3-style lower control arms can increase camber significantly, but it comes at the cost of reduced caster without replacing additional components. Our Race Spec Camber Plates solve this issue by adding camber at the top of the strut, minimizing geometry changes to other areas of the suspension system.

• 1.1* increase in negative camber
• CNC machined housings
• Designed for use with non-OEM style coilovers and struts
• Equalize tire wear and maximize traction at once
• Precision teflon-lined spherical bearing
• Reduced compliance results in more precise handling and alignment

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

S55

您正在查看的产品与这些编号存在交叉引用关系

Rennline Clubsport 外倾板顶部安装套件。
2 件套



适合：
保时捷 991/981/718 2WD（GT3/GT4 除外）

无论您在街道还是赛道上使用汽车，最佳外倾角设置对于街道和赛道上激烈驾驶时的性能和轮胎磨损都至关重要。这些板是为希望获得额外外倾角而无需更换 GT3 式可调控制臂的 991/981 车主设计的。通过使用偏置轴承座，外倾角调整范围可以改变，在所有 OEM 等效设置下提供额外的 1.1 度外倾角。

这些支架由 6061-T6 铝坯在内部 CNC 加工而成，强度最高，重量最轻。精密的聚四氟乙烯衬里轴承通过两部分螺纹外壳固定，消除了使用卡环的外倾角板常见的问题，例如噪音过大和过早失效。这还可以最大限度地减少负载下的外倾角变化，这意味着在最重要的时候您可以拥有更精确的对准设置。

专为使用原厂减震器和任何与 OEM 支架配合使用的售后市场设置的汽车而设计，这是在您的 991/981 汽车中获得外倾角的最简单方法。此外，通过在支柱顶部而不是控制臂处进行外倾角更改，可以最大限度地减少主销后倾角的变化，从而更容易设置并最大限度地减少必要的修改。

• 出厂设置下负外倾角增加 1.1*，从而带来更大的调整范围
• CNC 加工外壳
• 与采用工厂支架的工厂和售后减震器/弹簧套件完全兼容
• 均衡轮胎磨损并同时最大化牵引力
• 精密聚四氟乙烯内衬球形轴承
• 降低顺从性可实现更精确的处理和对准

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

S54

您正在查看的产品与这些编号存在交叉引用关系

Rennline Sealed REAR Top Mounts.
SET OF 2

Fits
Porsche 996 C2 3.4L / 3.6L (2 Wheel Drive)
Porsche 997 C2 3.6L / 3.8L (2 Wheel Drive)

Keep optimal rear suspension geometry at the track and during spirited street driving with Rennline Sealed Rear Strut Mounts. Factory bushings are designed to be compliant in an attempt to make the car more marketable, but if you are here you already know they could have created a more performance oriented design. Our strut mounts feature Teflon-lined spherical bearings mounted in precision machined housings to ensure a perfect fit and unbeatable quality. Unlike almost every other unit on the market, Rennline mounts include a dust boot to completely seal the bearing from stones and road grime and make our mounts a cut above the rest.

Will not work with factory suspension setup. For aftermarket coilovers only. Designed for use with conical style spring hats. If you have the cup style, see our conical style below which you will need.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

S26

您正在查看的产品与这些编号存在交叉引用关系

Rennline 油门延长器 -左舵车的跟/趾油门延长器



这些油门延长件设计用于与 Rennline 油门踏板 (# P70、P71 和 P73) 配合使用。

现在，所有油门延长套件都配有跟部和趾部延长件，可单独使用或一起使用。此套件不包含油门踏板盖。

根据您的驾驶风格，此油门扩展套件可用作跟部、趾部或跟部/趾部配置。它易于安装，可添加到大多数 Rennline 油门踏板上。有红色、银色或黑色可供选择。


注意：图片可能无法显示实际产品。

如果您对此是否适用于您的踏板有任何疑问，请联系我们。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PE7071HT

您正在查看的产品与这些编号存在交叉引用关系

Front Bumper Wire Mesh Grill Kit for cars WITHOUT 3rd Radiator.

Fits:
Porsche 981 Cayman GTS / 981 Boxster GTS
cars WITHOUT 3rd Radiator

One of Porsche's biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install an intake screen kit. Unlike most kits on the market, Rennline's has a unique screw and clip system that eliminates the need to glue or use exposed hardware. Every screen is pre-molded for your specific model resulting in a perfect fit every time.

Note: Some models use clips, some models use screws and some both.

Pictures may not reflect actual application.

Front Bumper Wire Mesh Grill Kit For cars WITH 3rd Radiator

Fits:
Porsche 981 Cayman GTS / 981 Boxster GTS
cars WITH 3rd Radiator

Note: Due to the placement of parking sensors this kit will fit cars WITH and WITHOUT parking sensors

One of Porsche's biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install an intake screen kit. Unlike most kits on the market, Rennline's has a unique screw and clip system that eliminates the need to glue or use exposed hardware. Every screen is pre-molded for your specific model resulting in a perfect fit every time. Note: Some models use clips, some models use screws and some both.

Pictures may not reflect actual application.

Rennline 无线电封闭板。



適用於:
保时捷 911 1985>>
保时捷 964
保时捷 993

收音机和加热器控制挡板 - 到目前为止，由于中央控制台上安装了必要的开关，因此无法从您的 964/993 上拆除中央控制台。Rennline 的新型收音机和加热器控制挡板解决了这个问题。这些挡板经过专门设计，可以容纳安装在所有 964/993 911 85+ 汽车中央控制台上的原厂开关。没有原厂开关？没问题。这些挡板也可不带开关切口，因此您可以安装自己的开关或仪表。挡板由粉末涂层金属制成，可在几分钟内安装在拆下收音机或加热器控制装置的汽车上。

有 6、3 和 0 开关配置可供选择。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

I21

您正在查看的产品与这些编号存在交叉引用关系

Rennline 遥控拉线套件，带 T 型手柄
适用于所有 Rennline 终止开关

適用於:
保时捷 911
保时捷 964
保时捷 993

大多数有组织的比赛活动都需要此物品。遥控拉线套件可让角落工作人员在紧急情况下轻松关闭汽车电源。此套件有一个 T 型手柄端，可通过现有或钻孔轻松安装。套件也可安装在仪表板上，方便驾驶员使用。套件包括 6 英尺红色拉线（带手柄）、电源/关闭标签、电缆端和完整安装说明。可用于多种不同的电池断路开关。

注意：图片可能无法显示实际产品。

适用于保时捷的 Rennline 可调踏板升降板



適用於:
保时捷 944 / 924 / 968
保时捷 996 / 997 / 991
保时捷 986 / 987 / 981 Boxster
保时捷 987 / 981 Cayman

无法脚跟/脚尖踩踏？需要增加油门踏板高度吗？Rennline 的可调节升降板可以解决这个问题。这款附加踏板配件可将您的标准 Rennline 油门踏板盖变成完全可调节的装置。这种独特的设计可在几分钟内安装完成，并允许全高度调节，最高可达 1 英寸。这款升降板不仅可调节高度，还允许您在横向和纵向两个方向上调节踏板角度。此功能允许您设置所需的精确角度，以便轻松执行脚跟/脚尖踩踏操作。最重要的是，每个调节都只需通过踏板表面的 3 个安装螺钉即可完成。

注意：这仅仅是升降板组件，该套件不包括踏板盖和延长件。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PA71

您正在查看的产品与这些编号存在交叉引用关系

Rennline 4 件式铝合金踏板组。橡胶握把
左舵车

適用於:
保时捷 991

保时捷 991.2
保时捷 981 Boxster
保时捷 718 Boxster
保时捷 981 Cayman
保时捷 718 Cayman

Rennline 的橡胶握把铝制踏板套是任何高性能汽车的终极内饰升级。市场上没有任何其他踏板可以让您灵活地添加和移除油门延长件和升降板，以微调您的个人人体工程学偏好。Rennline 通过利用可在需要时轻松更换的橡胶握把，将这种踏板设计提升到了一个新的水平。与市场上任何其他死踏板不同，Rennline 从一块厚坯料开始，将其加工成一个既实用又美观的部件，可保护工厂死踏板及其周围的地毯。这种增加的材料厚度还可确保橡胶握把永不脱落。每个踏板组附带 8 个替换橡胶握把，也可以随时单独购买。Rennline 踏板组由阳极氧化航空级铝制成，所有五金件均为不锈钢。

注意：图片可能无法显示实际产品。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

P7160101

您正在查看的产品与这些编号存在交叉引用关系

橡胶帽/靴钩。大号（2 件套）。

细节决定成败，所以无论您打造的是复古车、复制车、复古改装车还是致敬车，细节都至关重要。用这些 RSR 复制版橡胶引擎盖挂钩为您的爱车前部增添光彩；它们不仅外观精美，还能像原厂版一样减轻车身重量，减少复杂性。这些引擎盖挂钩是任何改装的完美补充，当人们看到您时，他们就会知道您精心打造了每一个细节。

Front bumper wire mesh grill kit w/ 3rd radiator, Inner & Outer, w/o Parking Sensors.

Fits:
Porsche 981 Cayman / 981 Cayman S
without Parking Sensors
with 3rd Radiator

One of Porsche's biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install an intake screen kit. Unlike most kits on the market, Rennline's has a unique screw and clip system that eliminates the need to glue, drill, or use exposed hardware. Every screen is pre-molded for your specific model resulting in a perfect fit every time.

Note: Some models use clips, some models use screws and some both. Both outer grills included.

Pictures may not reflect actual application

Front Bumper Wire Mesh Grill Kit w/ 3rd Radiator. Outer Grill Kit.

Fits:
Porsche 981 Cayman / 981 Cayman S
with Parking Sensors
with 3rd Radiator

One of Porsche's biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install an intake screen kit. Unlike most kits on the market, Rennline's has a unique screw and clip system that eliminates the need to glue, drill, or use exposed hardware. Every screen is pre-molded for your specific model resulting in a perfect fit every time.

Note: Some models use clips, some models use screws and some both. Both outer grills included.

Pictures may not reflect actual application

Rennline REV4 4PC踏板组橡胶握把。
左舵车



適用於:
保时捷 Panamera Tiptronic/PDK 汽车

Rennline 的完全可调油门踏板系统是业界首创，它最终解决了新型水冷汽车中油门组件脆弱且不稳定的问题。这些工厂塑料组件因结构脆弱且专为街道使用而设计，因此铰链和外壳故障问题非常严重。工厂用真正的金属对金属安装系统替换了赛车上的这些组件，现在您也可以这样做。Rennline 的完全可调踏板是一种非常独特的系统，它为您提供真正的金属对金属安装，同时保留了所有必要的电子设备和/或电缆。此外，使用随附的油门延长器，该踏板系统可以向任何方向调整，不仅可以调整高度和深度，还可以调整横向和角度，以及宽度。您再也不必费力地进行脚跟脚趾转向，也不必因为踏板故障而被拖入围场。

• 全铝坯和300系列不锈钢结构及补偿。
• 消除了易疲劳和故障的工厂塑料铰链和支架。
• 集成铰链采用浸渍 19% SAE 30 油的青铜轴承
• 通过允许驾驶员根据个人人体工程学进行调整，显著改善脚跟脚趾驾驶
• 精密加工的插座，可接受工厂电位器臂（Panamera）
• 可拆卸油门延长件
• 踏板盖有黑色和银色可供选择
• 踏板延长件有红色、黑色或银色可供选择
• 如果需要，橡胶把手可拆卸，为您提供光滑的踏板表面。

注意：图片可能无法显示实际产品。