伦林

Rennline Front bumper wire mesh grill kit Black.



Fits:
Porsche 95B.1 Macan / Macan S 2014-2018
(only for vehicles with Sport Design kit)


One of Porsche's biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install a Rennline Radiator Protection Grill Kit.

Why Rennline kits are the best:

• Rennline developed the "Original" Radiator protection system with years of proven results
Your car's nose already looks perfect, our kits install behind the louvers to retain a desired factory look
• No risk of paint damage due to misalignment or loose components like front mounted kits
• Rigid mount system that executes a true "protection system" not just aesthetic
• Unique screw and clip (some vehicle's don't require the clips, and simply install with screws) system that eliminates the need for adhesive, zip ties or other unreliable fastening technics.
• Powder coated aluminum resulting in the ultimate oxidation protection
• Millions of track miles and winning races have proven our mesh size will not affect airflow or cooling
• Every grill is pre-molded for your specific model resulting in a perfect fit every time
• Easy install, most kits take a total of an hour or less to install with basic hand tools. If removing your bumper cover seems intimidating, don't worry, average bumper removal time without a car lift is 10-15 mins
• Manufactured in the USA by Rennline, if you have a question we're here to help


* Cars with adaptive cruise control may require minor trimming with snips or scissors

钢坯 HVAC 控制面板。



適用於:
保时捷 65-89 911/912/930

Rennline HVAC 控制面板采用 CNC 铣削而成，由铝坯块制成，并经过阳极氧化处理，可升级为经典而优雅的仪表板。无论您是想清理早期 911 的仪表板，还是想将 G-body 汽车的仪表板翻新，这些 HVAC 控件都一定能胜任。该装置具有简化的标记和更新的微型 LED 指示器，与我们的 I12 坯料 HVAC 旋钮（未随附，但单独提供）完美搭配。OEM 塑料装置容易刮擦和褪色，而这些装置经得起时间的考验。可轻松安装到工厂控制机构上。

注意：如果安装在 74-89 年的汽车上，仪表板必须是追溯的，因为这些控制装置比后来的控制装置要小。

Bushing kit for camber plate and monoball.



For use with Rennline 964/993 Camber Plates and Monoball Strut Mounts

Bushing Kits for use with Rennline 964/993 Camber Plates and Monoball Strut Mounts. Kit is available in m12 or m14 sizes and includes 2 flat spacer bushings and 4 stepped bushings. These are replacement bushings which are only needed when swapping to struts with a different shaft diameter (These are included with the 964/993 front and rear upper monoball/camber plates).

Solid Rear Subframe Bushing Kit.


Fits:
Porsche 993

Factory rubber suspension mounts have a lot of flexibility and cannot withstand the extreme loads applied to them during performance driving conditions. When these mounts flex, all of the suspension geometry changes making the car unstable and unpredictable. A very popular suspension upgrade is to replace these bushings with solid mounts like the ones found on the factory race cars. These kits are machined out of billet aluminium and come with the required hardware to install.


Note: Pictures may not show actual product.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

SB5876

您正在查看的产品与这些编号存在交叉引用关系

滤油器滴油盘



適用於:
保时捷 911 / 930

如果您更换过 911 的机油滤清器，那么您一定知道这款产品的用途。从油箱中拧下机油滤清器后，您的手上立刻会变得一团糟……车架导轨、发动机锡和热交换器也是如此。使用此滴油盘接住机油，避免弄脏。此滴油盘经过特殊设计，可放置在车架导轨上并环绕机油滤清器底部。它甚至还包含磁铁，可在您处理工作时牢牢固定在原位。

Rennline Front bumper wire mesh grill kit - Black.



Fits:
Porsche 987.1 Cayman / Cayman S 2005-08
Porsche 987.2 Cayman / Cayman S 2009-12

One of Porsche's biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install a Rennline Radiator Protection Grill Kit.


Why Rennline kits are the best:

• Rennline developed the "Original" Radiator protection system with years of proven results
• Your car's nose already looks perfect, our kits install behind the louvers to retain a desired factory look
• No risk of paint damage due to misalignment or loose components like front mounted kits
Rigid mount system that executes a true "protection system" not just aesthetic
• Unique screw and clip system that eliminates the need for adhesive, zip ties or other unreliable fastening technics
• Powder coated aluminum resulting in the ultimate oxidation protection
• Millions of track miles and winning races have proven our mesh size will not affect airflow or cooling
• Every grill is pre-molded for your specific model resulting in a perfect fit every time
• Easy install, most kits take a total of an hour or less to install with basic hand tools. If removing your bumper cover seems intimidating, don't worry, average bumper removal time without a car lift is 10-15 mins
• Manufactured in the USA by Rennline.

Please note: ** If you select "No" to "Center Radiator", you will not receive a center screen as there is no place to affix it, and there is no functional reason to install it. If you plan to add a third radiator kit down the road, select "Yes" for this question.

Pictures may not reflect actual application.

Front bumper wire mesh grill kit



Fits:
Porsche 987.1 Boxster / Boxster S 2005-08
Porsche 987.2 Boxster / Boxster S 2009-12
Porsche 981 (718) Boxster 2013-16
Porsche 982 Boxster 2017>>

One of Porsche's biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator or condenser will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable damage to the radiators and condensers on your Porsche and avoid replacement costs is to install a Rennline Radiator Protection Grill Kit. These grill screens completely cover the radiators and prevent damage to the radiators and condensers on your Porsche.

Why Rennline kits are the best:

• Rennline developed the "Original" Radiator protection system with years of proven results
• Your car's nose already looks perfect, our kits install behind the louvers to retain a desired factory look
• No risk of paint damage due to misalignment or loose components like front mounted kits
Rigid mount system that executes a true "protection system" not just aesthetic
• Unique screw and clip system that eliminates the need for adhesive, zip ties or other unreliable fastening technics
• Powder coated aluminum resulting in the ultimate oxidation protection
• Millions of track miles and winning races have proven our mesh size will not affect airflow or cooling
• Every grill is pre-molded for your specific model resulting in a perfect fit every time
• Easy install, most kits take a total of an hour or less to install with basic hand tools. If removing your bumper cover seems intimidating, don't worry, average bumper removal time without a car lift is 10-15 mins
• Manufactured in the USA by Rennline.


* Porsche models with adaptive cruise control may require minor trimming with snips or scissors on the screens.

** If you select "No" to "Center Radiator", you will not receive a center screen as there is no place to afiix it, and there is no functional reason to install it. If you plan to add a third radiator kit down the road, select "Yes" for this question.

For bumper removal process, refer to our 991 how-to video, which is quite similar:



Pictures may not reflect actual application.

Front Bumper Wire Mesh Grill Kit - Black

Fits:
Porsche 991.1 C2 / C2S + T
Porsche 991.1 C4 / 991.1 C4S
Porsche 991.1 Turbo / 991.1 Turbo S
Porsche 991.1 Targa
Porsche 991.1 GTS

One of Porsche's biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install a Rennline Radiator Protection Grill Kit.

Why Rennline kits are the best:

• Rennline developed the "Original" Radiator protection system with years of proven results
• Your car's nose already looks perfect, our kits install behind the louvers to retain a desired factory look
• No risk of paint damage due to misalignment or loose components like front mounted kits
• Rigid mount system that executes a true "protection system" not just aesthetic
• Unique screw and clip (some vehicle's don't require the clips, and simply install with screws) system that eliminates the need for adhesive, zip ties or other unreliable fastening technics.
• Powder coated aluminum resulting in the ultimate oxidation protection
• Millions of track miles and winning races have proven our mesh size will not affect airflow or cooling
• Every grill is pre-molded for your specific model resulting in a perfect fit every time
• Easy install, most kits take a total of an hour or less to install with basic hand tools. If removing your bumper cover seems intimidating, don't worry, average bumper removal time without a car lift is 10-15 mins
• Manufactured in the USA by Rennline.

* Cars with adaptive cruise control may require minor trimming with snips or scissors

Please note: ** If you select "No" to "Center Radiator", you will not recieve a center screen as there is no place to affiix it, and there is no functional reason to install it. If you plan to add a third radiator kit down the road, select "Yes" for this question.

Pictures may not reflect actual application

Front Bumper Wire Mesh Grill Kit - Black

Fits:
Porsche 991.2 Carrera 2017>>
Porsche 991.2 Turbo / S 2017>>

Note: If you have the Sport Design package, be sure to select the Sport Design option under model, regardless of which 991 model you have.

One of Porsche's biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install a Rennline Radiator Protection Grill Kit.


Why Rennline kits are the best:

• Rennline developed the "Original" Radiator protection system with years of proven results
• Your car's nose already looks perfect, our kits install behind the louvers to retain a desired factory look
• No risk of paint damage due to misalignment or loose components like front mounted kits
• Rigid mount system that executes a true "protection system" not just aesthetic
• Unique screw and clip (some vehicle's don't require the clips, and simply install with screws) system that eliminates the need for adhesive, zip ties or other unreliable fastening technics.
• Powder coated aluminum resulting in the ultimate oxidation protection
• Millions of track miles and winning races have proven our mesh size will not affect airflow or cooling
• Every grill is pre-molded for your specific model resulting in a perfect fit every time
• Easy install, most kits take a total of an hour or less to install with basic hand tools. If removing your bumper cover seems intimidating, don't worry, average bumper removal time without a car lift is 10-15 mins
• Manufactured in the USA by Rennline.

* Cars with adaptive cruise control may require minor trimming with snips or scissors.

Please note : ** If you select "No" to "Center Radiator", you will not receive a center screen as there is no place to affix it, and there is no functional reason to install it. If you plan to add a third radiator kit down the road, select "Yes" for this question.

Pictures may not reflect actual application.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

E10002

您正在查看的产品与这些编号存在交叉引用关系

Front Bumper Wire Mesh Grill Kit.

Fits:
Porsche 982 (718) Cayman / Cayman S 2017>>

One of Porsche's biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install a Rennline Radiator Protection Grill Kit.


Why Rennline kits are the best:

• Rennline developed the "Original" Radiator protection system with years of proven results
• Your car's nose already looks perfect, our kits install behind the louvers to retain a desired factory look
• No risk of paint damage due to misalignment or loose components like front mounted kits
• Rigid mount system that executes a true "protection system" not just aesthetic
• Unique screw and clip system that eliminates the need for adhesive, zip ties or other unreliable fastening technics
• Powder coated aluminum resulting in the ultimate oxidation protection
• Millions of track miles and winning races have proven our mesh size will not affect airflow or cooling
• Every grill is pre-molded for your specific model resulting in a perfect fit every time
• Easy install, most kits take a total of an hour or less to install with basic hand tools. If removing your bumper cover seems intimidating, don't worry, average bumper removal time without a car lift is 10-15 mins
• Manufactured in the USA by Rennline.

Please note:** If you select "No" to "Center Radiator", you will not recieve a center screen as there is no place to affiix it, and there is no functional reason to install it. If you plan to add a third radiator kit down the road, select "Yes" for this question.

Pictures may not reflect actual application.

Front Bumper Wire Mesh Grill Kit - Black.

Fits:
Porsche 982 (718) Boxster / Boxster S 2017>>

One of Porsche's biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install a Rennline Radiator Protection Grill Kit.


Why Rennline kits are the best:

• Rennline developed the "Original" Radiator protection system with years of proven results
• Your car's nose already looks perfect, our kits install behind the louvers to retain a desired factory look
• No risk of paint damage due to misalignment or loose components like front mounted kits
• Rigid mount system that executes a true "protection system" not just aesthetic
• Unique screw and clip system that eliminates the need for adhesive, zip ties or other unreliable fastening technics
• Powder coated aluminum resulting in the ultimate oxidation protection
• Millions of track miles and winning races have proven our mesh size will not affect airflow or cooling
• Every grill is pre-molded for your specific model resulting in a perfect fit every time
• Easy install, most kits take a total of an hour or less to install with basic hand tools. If removing your bumper cover seems intimidating, don't worry, average bumper removal time without a car lift is 10-15 mins
• Manufactured in the USA by Rennline.

Please note:** If you select "No" to "Center Radiator", you will not recieve a center screen as there is no place to affiix it, and there is no functional reason to install it. If you plan to add a third radiator kit down the road, select "Yes" for this question.

Pictures may not reflect actual application.

Rennline 折叠牵引钩 - REV2。

TOW 标签为可选附加标签。不包含在价格内。需单独购买。

適用於:
保时捷 981 - 正面
保时捷 718 - 正面
保时捷 991 - 正面
保时捷 991.2 - 正面
保时捷 Panamera - 前部

对于 991.1 GT3RS，使用“991”选项。

对于 991.2 GT3RS，使用“991.2 GT3”选项。

对于 718 GT4，使用“718”选项。

**不适合 981 GT4 或 Spyder。请参阅这些型号的 E19.249**

推出最新的拖钩创新技术：采用增强的侧向负载能力和可调节长度的刚性安装接收器。这种锥形不锈钢环设计采用了新的锁定功能，可保持您喜欢的环位置。其他功能包括机械加工图形、旋转定时和相机安装兼容性。

Rennline 的不锈钢折叠式赛车挂钩可在几分钟内安装在任何带有工厂螺丝型可拆卸牵引钩的保时捷上。与市场上通常宣传为“仅用于装饰目的”的铝制装置不同，Rennline 的不锈钢牵引钩经过精密加工，可承受任何比赛环境中的极端磨损。这些牵引钩具有 2 英寸开口，符合大多数有组织的比赛活动的要求，并直接拧入工厂保险杠牵引钩位置。每个挂钩都配有橡胶保险杠，可贴在背面，以确保您的保险杠盖永远不会因钩子接触而刮伤。安装一组既显眼又功能强大的挂钩，让弯道工人和赛道官员感到满意。为什么我们的产品是最好的：

• 我们拥有原装折叠式拖钩，多年来已历经数千次验证。
• 全机加工锥形设计，边缘倒角，无需切割牵引带
• 完美无瑕的拉丝表面处理
• 300 系列不锈钢牵引环
• 红色“TOW”图形
• 兼容 Go Pro 相机支架（支架单独出售）

Rennline Cup 和 RS 工厂风格 Kill Switch 支架。



適用於:
保时捷 964
保时捷 993

如今，964/993 汽车在市场上越来越受欢迎，甚至失控。车主们正在将这些汽车改造成 Cup 克隆版、RS 克隆版，甚至将它们追溯到长引擎盖改装车。这些稀有的工厂汽车上的工厂风格开关支架无法获得，迫使车主自己制作，或接受非纯粹的替代品。由于需求量大，Rennline 已准备好生产这些支架的精确复制品。每个套件都配有 (1) 个开关支架、(1) 个远程拉线支架，已上漆并准备安装。虽然这些支架旨在像工厂那样焊接，但许多客户选择用螺钉安装它们。

注意：图片可能无法显示实际产品。