大象赛跑

Eccentric adjuster locking kit.
4pcs in kit - 1 kit required per car



Fits
Porsche 986 Boxster
Porsche 987 Boxster and Cayman
Porsche 996
Porsche 997

Prevent Alignment Settings From Slipping

Losing on the track is bad enough, but losing the alignment on the track is even worse. Prevent your eccentric adjuster bolts from slipping under heavy cornering loads with our Eccentric Adjuster Locking Kit.

Complete kit includes four lockout plates. Two plates are used to lock the rear toe adjusters and two plates to lock the camber settings.

Retain convenience and functionality of the eccentric adjuster. The original functionality of the adjuster is completely preserved. The plate can be set in any position.

Retain full range of the adjuster. These lockout plates do not limit adjustment range in any way, maximum toe and negative camber can be achieved with these plates in place.

Works with OEM fixed length arms and our adjustable length control arms as well.The unique design features a slotted hole that counters the slot provided for the adjuster. The plate can be moved up and down to reach any camber or toe setting desirable.

The Locking plates function by increasing the friction that holds the factory eccentric adjusters in place. These plates are guaranteed to prevent any adjuster slip even under aggressive driving conditions.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2180017

您正在查看的产品与这些编号存在交叉引用关系

Rear adjustable lower toe control arms.



Fits
Porsche 981 Boxster and Cayman
Porsche 981 GT4

Set of 2 x adjustable toe control rod ends

Lowered 966,997, Boxsters and Caymans run out of rear toe adjustment range. Our Adjustable rear toe links extend the range of adjustment and add bump steer correction.

Adjustable Length – Threaded double adjuster for easy toe settings.

Angled Head – Lower the car and the toe links angle down. This shifts the ball stud from its center and limits the available range of articulation.
We solve this problem by angling the head to move the stud back towards the center of its range of articulation at static ride height.

Bump Steer Adjustable – 986 and 987 version have built in bump steer adjustment that lets you dial in a minimal bump steer curve.

Fully Weather Sealed – Proper boots at both the ball joint and heim joint ends to keep water and contaminant out for extended life.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2180020

您正在查看的产品与这些编号存在交叉引用关系

下叉臂中央衬套拆卸和安装工具。

需要 1 个工具

#大象赛跑#

适合
保时捷 986 Boxster -前部和后部
保时捷 987 Boxster 和 Cayman -前部和后部
保时捷 996 -前部和后部
保时捷 997 -前部和后部
保时捷 981 Boxster 和 Cayman -仅前部
保时捷 991 -仅正面

简化 Monoball 产品和更换衬套的安装过程。

我们的两件式杯形和活塞工具可轻松取出和插入衬套，无需拆卸轮架或控制臂。无需使用车间压力机。这些工具的设计精确贴合衬套周长，可防止衬套意外损坏并确保正确安装。

我们有用于 LCA 中央衬套、后直立 LCA 衬套和后直立减震器支架衬套的工具。

996、997、986、987 和 981 上的前后控制臂
前下控制臂仅适用于 991

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2260019

您正在查看的产品与这些编号存在交叉引用关系

Adjustable caster bushing kit.
1 kit required per axle



Fits
Porsche 986 Boxster - Front and Rear
Porsche 987 Boxster and Cayman - Front and Rear
Porsche 996 - Front and Rear
Porsche 997 - Front and Rear
Porsche 981 Boxster and Cayman -Front Only
Porsche 991 -Front Only

Caster Tuning
Our Caster Adjuster allows you to tune this important setting that the factory left out. A must-have for cars that have extended lower control arms (GT3 control arms or eccentric monoballs) to correct for un-intended caster change that is caused by the extended arms.

Caster is also a great tuning aid for adjusting out understeer. Our Caster Adjusters let you tune the caster you need.

Two eccentric mounting points increase range of adjustment by up to 25mm. Choose from the inner bore for minor caster adjustments or the outer bore for extreme adjustments.

Rear Weight Bias
For the rear suspension, our Caster Adjuster can reduce rear overhang and rear weight bias. Cars with aggressive rear camber actually draw the wheels forward, increasing rear weight bias. Use our Caster Adjuster to compensate and even over-compensate for less rear weight bias than stock

Maintain Proper Alignment
Our Caster Adjuster is solid aluminum to hold alignment settings precisely. Stock rubber bushings compress under load, allowing alignment to wander and making the car less predictable. Our solid design eliminates compression, improves precision and maintains geometry true.

Functional Design Built To Last
Available for factory type lower control arms (wishbones) front and rear, including stock type arms and GT3 arms

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2180011

您正在查看的产品与这些编号存在交叉引用关系

Offset camber plates.
Sold as a pair - 1 pair, required per car



Fits Front
Porsche 981 Boxster and Cayman
Porsche 718 Boxster and Cayman
Porsche 991 Carrera, Carrera 4
Porsche 991 Carrera S, Carrera 4S

More Camber and Caster

Our offset front camber plates allow for additional camber and castor over the factory range of adjustment, similar to the GT3 geometry. These camber plates fit original factory type struts, including those equipped with PASM.

These plates use high strength hardened steel spherical bearings and are direct replacements for the factory plates which use compliant rubber bushings. The Teflon lined spherical bearings used in our kit are entirely maintenance free and require no supplemental lubrication. These plates are sealed to prevent contamination from water or grime, thus extending bearing life. This makes the Elephant Racing camber plate kit perfect for regular street use, as well as extended abuse on the race track.

Higher Performance

Spherical bearings further improve performance. The spherical bearings pivot freely, but eliminate the deflection that is inherent with the factory rubber bushings. This is important for two reasons

– The factory rubber acts as a spring in series with the strut. This rubber spring-action is completely un-damped and reduces the struts ability to control the tire contact patch. The spherical bearing allows the strut damper to do its job and control the contact patch.

– The factory rubber deflects sideways under cornering loads, causing loss of camber just when you need it most. Our spherical bearings eliminate the deflection, maintaining stable and predictable camber.

Use Stock Springs or Coilovers

Fully compatible with stock springs and aftermarket lowering springs. Also supports coilovers that use and upper spring perch.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

21522

您正在查看的产品与这些编号存在交叉引用关系

Adjustable caster arms with anti-dive and anti-squat.



Fits
Porsche 986 Boxster - Front Only
Porsche 987 Boxster and Cayman - Front Only
Porsche 996 - Front and Rear
Porsche 997 - Front and Rear

Set of 2 x Adjustable caster arms - 1 pair, required per axle

Elephant Racing caster arms provide adjustable caster and anti-dive ability when used on the front, and adjustable wheel base, weight distribution, and anti-squat when used on the rear.

Front Suspension

Threaded double-adjuster makes it easy to extend or shorten the arm.

This makes for easy caster adjustment – an important adjustment the factory left out. A must-have for cars with GT3 style extendable style lower control arms to correct for un-intended caster increase that is caused by the extended LCAs.

Anti-dive behavior can also be adjusted. Lowering the front of the arm using the provided spacers reduces front dive under braking. Adjustable in 2mm increments.

Rear Suspension

Adjustable Caster Arms can reduce rear overhang and rear weight bias. A must-have for cars with GT3 style extendable style lower control arms. Adjust the length of the caster arms to correct the position of the rear wheels that have been drawn forward by aggressive camber settings. Even over-compensate for less rear weight bias than stock.

With the heavy mass of the engine cantilevered behind the rear axle, even small changes in wheel base make significant changes in weight distribution. Shortening the overhang reduces the famous 911 "pendulum" effect in corners.

Anti-squat behavior can also be adjusted. Raising the front of the caster arm using the provided spacers reduces rear squat under acceleration. Adjustable in 2mm increments.

Fully weather sealed> – Proper boots at the heim joint keep water and contaminant out for extended life.

If not using Adjustable Lower Control Arms

1999-2012 996, Boxster, Cayman, & GT3 Front: Bolt on if replacing the lower control arm central bushing with 2290022 / 2290014 rubber bushings, or our 2180011 camber adjusters.

1999-2012 996, 997 & GT3 Rear: Straight bolt on.

2006-2018 997, Boxster, Cayman, & 991 Front: Requires fitment of our part number 2290022 or 2290014 LCA central bushings or 2180011 solid caster bushing kit

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2180005

您正在查看的产品与这些编号存在交叉引用关系

Adjustable lower control arms (lower wishbone)



Fits
Porsche 986 Boxster - Front and Rear
Porsche 996, 997 - Front and Rear
Porsche 991 - Front Only
Porsche 987 Boxster and Cayman - Front and Rear
Porsche 981 Boxster and Cayman - Front and Rear
Porsche 718 Boxster and Cayman - Front and Rear

Set of 2 x Adjustable lower control arms - 1 pair, required per axle

Elephant Racing adjustable lower control arms provide the camber, caster and precision you need. Length adjustable similar to the factory GT3 control arms, but without the need for shims.

Quick and Easy Adjustments – No need to keep a stock of shims on hand, length is easily adjusted by rotating the center hex head. Rotate clockwise to expand or counter-clockwise to contract the arm length.Adjustments can be made within minutes. No shims to mess with. Perfect setup to make quick changes for the track.

Widen Track – Use in combination with our camber plates on the front, or our adjustable length arms upper control arms on the rear to widen the track. This allows you to achieve a wider track without altering the scrub radius as happens when using wheel spacers.

Heim Joint – Our spherical bearings eliminate the deflection associated with rubber bushings. These bearings maintain stable suspension alignment, and improve feedback.

Fully Weather Sealed – Proper boots at both the ball joint and heim joint ends to keep water and contaminants out for extended life. These arms are suitable for extended road and track use.

Camber Adjustment – Extended range of adjustment lets you achieve aggressive camber. Or you can dial it back to get a factory street alignment on lowered cars.

Caster Adjustment – Our Caster Adjuster allows you to tune this important setting that the factory left out. A must-have for cars that have extended lower control arms to correct for un-intended caster change that is caused by the extended arms. Rotate the center puck and bolt down to secure the setting.

The arms are fully rebuildable with replaceable heim and ball joints.

On 996, 997, & 991 Cars:
Center puck can be also used as a wheelbase adjuster on the rear to draw the wheels back to improve weight distribution. It is a great tuning aid for adjusting out understeer

Litronic Bracket – This bracket is required for cars that are originally equipped with the litronic headlights. This adapter bracket attaches to the headlight angle sensor.


相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2180001

您正在查看的产品与这些编号存在交叉引用关系

Rear adjustable lower toe control arms. Cars from 1997 to 2012.



Fits
Porsche 986 Boxster
Porsche 996, 997
Porsche 987 Boxster and Cayman

Set of 2 x adjustable toe control rod ends

Lowered 966,997, Boxsters and Caymans run out of rear toe adjustment range. Our Adjustable rear toe links extend the range of adjustment and add bump steer correction.

Adjustable Length – Threaded double adjuster for easy toe settings.

Angled Head – Lower the car and the toe links angle down. This shifts the ball stud from its centre and limits the available range of articulation.
We solve this problem by angling the head to move the stud back towards the centre of its range of articulation at static ride height.

Bump Steer Adjustable – 986 and 987 version have built in bump steer adjustment that lets you dial in a minimal bump steer curve.

Fully Weather Sealed – Proper boots at both the ball joint and heim joint ends to keep water and contaminant out for extended life.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2180002

您正在查看的产品与这些编号存在交叉引用关系

Bump steer adjustable track rod ends.



Fits
Porsche 986 Boxster
Porsche 996, 997
Porsche 987 Boxster and Cayman
Porsche 981 Boxster and Cayman
Porsche 991

Set of 2 x adjustable track rod ends

Correct geometry for lowered cars with bump steer adjustment and angled head.

Bump steer adjustable – The built in bump steer adjustment lets you dial in a minimal bump steer curve.

Angled head – Lower the car and the tie rods angle down. This shifts the ball stud from its center and limits the available range of articulation.
We solve this problem by angling the head to move the stud back towards the center of its range of articulation at static ride height.

Fully weather sealed – Proper boot at the ball stud to keep water and contaminant out for extended life.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2180008

您正在查看的产品与这些编号存在交叉引用关系

Spring plate PolyBronze bearings
For Porsche 911, 912, 930 1968-1989 Spring Plate SAW



PolyBronze bearings are superior to plastic bushing alternatives, here's why:

Suspension mounts are coarse sheet metal pressings. They tend to be out-of-round and have irregularities that deform ordinary polyurethane bushings, pinching and binding the friction surface. Polyurethane is "grippy" with an inherently high coefficient of friction and combined with pinching polyurethane bushings create a lot of friction. The result is a harsh ride and reduced tire adhesion.

PolyBronze have a rigid bronze bearing core that does not deform. The polyurethane jacket absorbs mount irregularities while the bronze inner bearing remains true, providing a free-moving machined-fit that rides on a precision race. Provided grease fittings make re-lubrication a breeze and a figure 8 groove keeps grease in place.

The combination delivers zero squeaks and friction-free suspension movement. Well suited to street or track, ride quality.

PolyBronze is a precision bronze bearing encased in a polyurethane jacket. The combination delivers a smooth-ride with the extreme performance of a metal bearing.

✔ No squeaks or binding
✔ Extremely smooth ride quality
✔ Easier to install than rubber bushings
✔ Integrated grease fittings and grooves

Note – 1967 spring plate bushings changed mid-year. The following '67 chassis numbers transitioned to the late style '69-'89 style bushes.

• '67 911 from Chassis Serial Number 307 325
• '67 912 from Chassis Serial Number 354 938
• '67 911 S from Chassis Serial Number 305 101 A

All earlier '67 chassis numbers use the early '65-'66 style bushes.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2061501

您正在查看的产品与这些编号存在交叉引用关系

ASP™ Adjustable Spring Plate
For Porsche 69-89 911, 912, 930 1969 - 1989
1 kit req'd per car



More Grip, Better Tire Contact Patch

Updates the rear suspension camber curve to meet the needs of modern, wide, low-profile radial tires. The result is superior grip in turns, superior grip in straight-line braking, reduced tire wear. Excellent for both street and track.

✔ Improved contact patch in turns
✔ Improved contact patch for straight-line braking
✔ Go street-to-track with one camber setting
✔ Reduced tire wear
✔ Reduced camber thrust/rolling resistance

ASP Makes The Tire Gain Camber Faster.

As the suspension compresses in turns, countering the effects of body roll and matching the needs of modern radial tires. The tire remains square with the road surface and the contact patch is improved. Grip increases.

With the ASP '69-'89 911s can now achieve modern suspension performance.

How Does It Work?

The 911 suspension was designed in the early 1960s for narrow, high-profile, bias ply tires of the day. '60s bias ply tires did not need or like a lot of negative camber.

Fast forward 50+ years to 2013 – tire technology has progressed – we run wide, low-profile, radial tires. Modern tires need a lot of negative camber to grip well. No surprise, the 911 suspension designed nearly 50 years ago doesn't match the needs of modern tires!

All modern Porsches are designed with aggressive camber curves matching radial tires needs beginning with the 1990 911(964) and continuing through the current models. The ASP updates the early 911 suspension to similarly perform with modern radial tires.

The core problem is illustrated by the stock blue 911 pictured, the tires follow the lean of the car in the turn – causing poor contact as the tires roll over onto the outside edge. The rate of camber gain is too slow, grip suffers.

Easy To Setup Toe And Camber Independantly

Replaces the troublesome stock eccentric adjusters with simple double-adjusters.

ASP allows adjustment with vehicle weight resting on the tires making it easy to read a camber / toe gauge while turning the adjusters. Quick changes can be made trackside even if a camber gauge is not available.

✔ Upper and lower double-adjusters
✔ Rotate same direction to set toe
✔ Rotate opposite direction to set static camber

Replaces stock '69-'89 spring plate blade and spring plate cover. Bolt on – no welding required, works with torsion bars or coilovers. Use with any standard size bushing – not included – PolyBronze recommended. Requires the splined hub portion from a set of factory adjustable spring plates or the QuickChange Spring Plate splined hub. Download instructions for more information.

Note – Some images show the ASP pictured with optionally available QuickChange Splined Hub and PolyBronze Bearings. Trailing arm is not included and is shown for reference only.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2142100

您正在查看的产品与这些编号存在交叉引用关系

Adjustable drop links.
PAIR, 1 pair required per car



Fits:
Porsche 996 1999-05 FRONT C4
Porsche 997 2005-12 FRONT C4

The ideal swaybar is completely unloaded at static ride height but stock drop links almost always preload the swaybar since the car doesn't sit perfectly level due to asymmetries such as driver weight and other factors.

A preloaded swaybar shifts the weight carried by each of the tires, increasing grip on weighted tires at the expense of decreasing grip on un-weighted tires. This shifted weight/grip causes uneven handling in left and right turns, and premature brake lockup since the less-loaded tire locks up first.

These adjustable drop links can completely eliminate swaybar preload by easily adjusting drop link length and therefore swaybar performance will be optimized.

✓ Maintenance-free precision rod ends
✓ Weather-sealed
✓ Light weight aluminum design
✓ Easy Bolt-on replacement

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2271014

您正在查看的产品与这些编号存在交叉引用关系

Adjustable drop links.
PAIR, 1 pair required per car



Fits:
Porsche 996 1999-05 FRONT With GT3 Swaybar And C4 Upright
Porsche 997 2005-12 FRONT With GT3 Swaybar And C4 Upright


The ideal swaybar is completely unloaded at static ride height but stock drop links almost always preload the swaybar since the car doesn't sit perfectly level due to asymmetries such as driver weight and other factors.

A preloaded swaybar shifts the weight carried by each of the tires, increasing grip on weighted tires at the expense of decreasing grip on un-weighted tires. This shifted weight/grip causes uneven handling in left and right turns, and premature brake lockup since the less-loaded tire locks up first.

These adjustable drop links can completely eliminate swaybar preload by easily adjusting drop link length and therefore swaybar performance will be optimized.

✓ Maintenance-free precision rod ends
✓ Weather-sealed
✓ Light weight aluminum design
✓ Easy Bolt-on replacement

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2271016

您正在查看的产品与这些编号存在交叉引用关系

可调节的下拉链接。
一对，每辆车需要一对

#大象赛跑#

適用於:
保时捷 996 1999-05 前 GT3 稳定杆 / GT3 直立杆
保时捷 997 2005-12 前 GT3 稳定杆 / GT3 直立杆


理想的防倾杆在静态行驶高度时是完全无载的，但由于驾驶员体重等因素造成的不对称导致车辆无法完全保持水平，因此原装下拉杆几乎总是会对防倾杆进行预载。

预载的防倾杆会转移每个轮胎所承受的重量，增加加重轮胎的抓地力，但会降低非加重轮胎的抓地力。这种转移的重量/抓地力会导致左转和右转时操控不均匀，并且由于负载较小的轮胎会先锁死，从而导致刹车过早锁死。

这些可调节的下拉杆可以通过轻松调节下拉杆长度来完全消除稳定杆预载，从而优化稳定杆性能。

✓ 免维护精密杆端关节轴承
✓ 防风雨
✓ 轻质铝设计
✓ 轻松螺栓更换

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2271015

您正在查看的产品与这些编号存在交叉引用关系

Adjustable drop links.
PAIR, 1 pair required per car



Fits:
Porsche 996 1999-05 FRONT C2 Stock / M030 Swaybar
Porsche 997 2005-12 FRONT C2 Stock / M030 Swaybar
Porsche 986 Boxster 1997-05 FRONT M030 Swaybar
Porsche 987 Boxster 2005-12 FRONT M030 Swaybar
Porsche 987C Cayman 2005-12 FRONT M030 Swaybar


The ideal swaybar is completely unloaded at static ride height but stock drop links almost always preload the swaybar since the car doesn't sit perfectly level due to asymmetries such as driver weight and other factors.

A preloaded swaybar shifts the weight carried by each of the tires, increasing grip on weighted tires at the expense of decreasing grip on un-weighted tires. This shifted weight/grip causes uneven handling in left and right turns, and premature brake lockup since the less-loaded tire locks up first.

These adjustable drop links can completely eliminate swaybar preload by easily adjusting drop link length and therefore swaybar performance will be optimized.

✓ Maintenance-free precision rod ends
✓ Weather-sealed
✓ Light weight aluminum design
✓ Easy Bolt-on replacement

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2271005

您正在查看的产品与这些编号存在交叉引用关系

Adjustable drop links.
PAIR, 1 pair required per car



Fits:
Porsche 996 1999-05 FRONT, with GT3 Swaybar And C2 Upright,
Porsche 997 2005-12 FRONT, with GT3 Swaybar And C2 Upright,
Porsche 986 Boxster 1997-05 FRONT, with GT3 Swaybar
Porsche 987 Boxster 2005-12 FRONT, with GT3 Swaybar


The ideal swaybar is completely unloaded at static ride height but stock drop links almost always preload the swaybar since the car doesn't sit perfectly level due to asymmetries such as driver weight and other factors.

A preloaded swaybar shifts the weight carried by each of the tires, increasing grip on weighted tires at the expense of decreasing grip on un-weighted tires. This shifted weight/grip causes uneven handling in left and right turns, and premature brake lockup since the less-loaded tire locks up first.

These adjustable drop links can completely eliminate swaybar preload by easily adjusting drop link length and therefore swaybar performance will be optimized.

✓ Maintenance-free precision rod ends
✓ Weather-sealed
✓ Light weight aluminum design
✓ Easy Bolt-on replacement

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2271013

您正在查看的产品与这些编号存在交叉引用关系